Coleman 7700 LP Gas Series Assembly Manual page 9

Step
2
2-A
Hardware shown actual size
(VP)
Self Tapping Screw
(1) Qty.
2-B
VP
Cylinder
Support
Carefully turn the assembly
Right-Side-Up.
Engage the Locking
Casters to prevent
movement during the rest
of the assembly process.
2-A. Assemble the Cylinder
Retaining Bolt to the
Cylinder Support.
NOTE: On some
models, the Cylinder
Retaining Bolt is
pre-installed by the
factory.
2-B. Assemble the Cylinder
Support to the Base by
engaging the tabs in
the slots. Secure the
support with one screw
(VP).
Step
3
Hardware shown actual size
(TN)
M6 x 15mm Screw
(4) Qty.
3-A
TN
Left
Panel
Front
Notch for Cylinder Support
TN
Assemble the Right Side
Panel.
Assemble the Left Side
Panel.
3-A. Assemble the
Right Side Panel
and the Left Side
Panel to the Base
using four Screws
(TN).
Tighten all fasten-
ers.
Vents Toward Rear
Right
Panel
TN
9