Coleman 7700 LP Gas Series Assembly Manual page 35

NOTE: Step 36 applies to you only if your grill is set up from the factory to use NATURAL GAS. If your grill is set up from
the factory to use LP GAS, skip back to Step 35.
Step
36
Y N
OUR ATURAL GAS COMPANY
GAS SUPPLY LINE TO THE GRILL
36-A
Rubber Plug
Quick Disconnect Coupling
36-B
Attach a NATURAL GAS
line to the grill.
MUST
INSTALL AND CONNECT THE
.
Rubber Cap
Hose Connector
P
LACE THE RUBBER PLUG ONTO THE GAS SUPPLY LINE
ATTACH THE SOCKET END OF THE QUICK DISCONNECT COUPLING
ONTO THE GAS SUPPLY LINE
L
EAK TEST AT THE FUEL SOURCE CONNECTION WITH SOAP AND
. T
WATER HE RUBBER PLUG IS USED TO PROTECT THE CONNEC
TOR WHEN THE HOSE CONNECTOR IS NOT INSERTED
P
OSITION THE RUBBER CAP ONTO THE HOSE
U
SE THE CAP TO COVER THE HOSE CONNECTOR WHEN NOT
ATTACHED TO THE FUEL SOURCE
CAUTION: M
"OFF"
ARE IN THE POSITION BEFORE CONNECTING THE LOWER
END OF THE HOSE TO THE FUEL SOURCE
T
O CONNECT AT THE FUEL SOURCE
THE QUICK DISCONNECT COUPLING AND INSERT THE HOSE CON
. R
NECTOR ELEASE THE SLEEVE AND PUSH THE CONNECTOR INTO
THE COUPLER UNTIL THE SLEEVE SNAPS FORWARD
T
O DISCONNECT AT THE FUEL SOURCE
AND PULL OUT THE CONNECTOR
. I
OFF THE GAS MMEDIATELY PLACE THE RUBBER PLUG INTO THE
Q .T
UICK DISCONNECT END
.
VALVE IF APPLICABLE
WARNING: D
URING ASSEMBLY OF GRILL AND WHEN
CONNECTING OR DISCONNECTING THE HOSE FROM THE FUEL
,
SUPPLY LINE INSURE THAT THE GAS SUPPLY HOSE IS FREE OF
/
KINKS AND OR DAMAGE AND IS AT LEAST
SURFACES SUCH AS THE GRILL CASTING
36-C
Quick Disconnect Coupling
. T
. T .
IGHTEN WITH A WRENCH
.
C
ONNECTOR
.
AKE SURE THE GAS CONTROL KNOBS
.
:
PUSH BACK THE SLEEVE OF
.
:
PUSH BACK THE SLEEVE
. T
HIS AUTOMATICALLY SHUTS
URN OFF THE FUEL SOURCE SHUT
3"
AWAY FROM HOT
.
HEN
-
.
-
-
OFF
35