Coleman 7700 LP Gas Series Assembly Manual page 18

Step
16
16-A
Left Fryer
Assembly
Left Rear
Panel
16-B
18
NOTE: The Grill Lids must be
opened for Step 16 and 17.
Assemble Left Fryer Assembly
to the Grill.
Hardware shown actual size
M6 x 15mm Screw
(1) Qty.
16-A. Raise the Grill Lids.
Place the Left Fryer Assembly
against the Firebox and on top of the
Left Rear Panel.
16-C
16-B. Align three studs from Left Fryer
Assembly with slots in flange of the
Left Rear Panel.
LOOSELY install one Screw (TN)
upward through the Flange of the
Left Rear Panel into the Left Fryer
Assembly.
NOTE: You will tighten this screw
LATER (after Step 17-C), after the
left side of the Firebox is attached to
the Grill Cart (this helps with
alignment).
(TN)
Flange
TN