Pch-Fw Configuration - Asus PRIME Intel 500 Series Manual

SMART Self Test
The SMART (Self-Monitoring, Analysis and Reporting Technology) is a monitoring system
that shows a warning message during POST (Power-on Self Test) when any error occurs in
the hard disks. Configuration options: [On] [Off]
SATA6G_1(~6)(Gray)
Allows you to change the name of the SATA port. Press <Enter> and a popup window
appears. Enter a new name, then press <Enter> or click the Ok button to confirm the change.
SATA6G_1(~6)(Gray)
Allows you to enable or disable the SATA port. Configuration options: [Disabled] [Enabled]
SATA6G_1(~6) Hot Plug
Allows you to designate the SATA port as Hot Pluggable.
Configuration options: [Disabled] [Enabled]
7.6

PCH-FW Configuration

The items in this menu allow you to configure the Management Engine Technology
parameters.
TPM Device Selection
Allows you to select TPM device.
Configuration options: [Enable Discrete TPM] [Enable Firmware TPM]
[Enable Discrete TPM]
[Enable Firmware TPM]
•
•
34
https://tm.by
Интернет-магазин TM.by
Enables Discrete TPM, disables platform Firmware TPM.
Enables platform Firmware TPM, disables Discrete TPM.
Intel PTT is a hardware TPM 2.0 implementation integrated in Intel
®
for credential storage and key management. The firmware TPM key will be stored in
Intel ME data region once you enable Intel
®
encryption.
Please note that when the recovery key is lost or when the BIOS ROM chip is
replaced, the system will not boot into the operating system and the data will stay
encrypted and cannot be restored.
PRIME / TUF GAMING Intel
ME/CSME/TXE
®
PTT and Windows BitLocker for drive
® ®
® 500 Series BIOS Manual