3.6.12
Thunderbolt(TM) Configuration
The items in this menu allow you to configure Thunderbolt settings.
TBT Root port Selector
This item allows you to select the thunder root port.
Configuration options: [Thunderbolt Disabled] [PCIE16_2]
3.6.13
PCH-FW Configuration
This item allows you to configure the firmware TPM.
3.7
Monitor menu
The Monitor menu displays the system temperature/power status, and allows you to change
the fan settings.
Q-Fan Configuration
Q-Fan Tuning
Click this item to automatically detect the lowest speed and configure the minimum
duty cycle for each fan.
AIO PUMP/W_PUMP+ Control
[Disabled]
[Auto]
[DC mode]
[PWM mode]
3.8
Boot menu
The Boot menu items allow you to change the system boot options.
Fast Boot
[Disabled]
Allows your system to go back to its normal boot speed.
[Enabled]
Allows your system to accelerate the boot speed.
The following items appear only when you set the Fast Boot to [Enabled].
Next Boot after AC Power Loss
[Normal Boot]
[Fast Boot]
ASUS WS C422 SAGE/10G
Disable the Water Pump control feature.
Detects the type of water pump installed and automatically switches
the control modes.
Enable the Water Pump control in DC mode for 3-pin chassis fan.
Enable the Water Pump control in PWM mode for 4-pin chassis fan.
Returns to normal boot on the next boot after an AC power loss.
Accelerates the boot speed on the next boot after an AC power loss.
3-19