Asus PRIME Intel 500 Series Manual page 49

AIO PUMP Control
Allows you to set AIO Pump fan control mode.
Configuration options: [Auto Detect] [DC Mode] [PWM Mode]
[Auto Detect]
[DC Mode]
[PWM Mode]
AIO PUMP Profile
Allows you to select the appropriate performance level for AIO Pump fan.
Configuration options: [Standard] [Silent] [Turbo] [Full Speed] [Manual]
If AIO PUMP Profile is set to [Manual], we suggest raising your fan/pump duty to 100% if
your CPU temperature exceeds 75°C. Please be noted CPU performance will throttle due
to overheating with inefficient fan/pump duty.
The following items will not appear if you set AIO PUMP Profile to [Full Speed].
AIO PUMP Fan Q-Fan Source
AIO Pump fan will be controlled according to the selected temperature source.
Configuration options: [CPU] [MotherBoard] [VRM] [Chipset] [Multiple Sources]
The following items appear only when you set [AIO PUMP Fan Q-Fan Source] to [Multiple
Sources].
PRIME / TUF GAMING Intel
https://tm.by
Интернет-магазин TM.by
Chassis Fan 1(~3) Max. Duty Cycle (%)
Allow you to set the maximum fan duty cycle and the source temperature
upper limit. When the source temperature reaches the upper limit, chassis
fans will operate at the maximum duty cycle. Configuration options: [0] – [100]
Chassis Fan 1(~3) Middle Temperature
Allow you to set the middle temperature. Chassis fans will operate at the
middle duty cycle when the source temperature is higher than the limit.
Configuration options: [0] – [100]
Chassis Fan 1(~3) Middle Duty Cycle (%)
Allow you to set the middle fan duty cycle and the source temperature upper
limit. When the source temperature reaches the middle limit, chassis fans will
operate at the middle duty cycle. Configuration options: [0] – [100]
Chassis Fan 1(~3) Lower Temperature
Allow you to set the lower temperature. Chassis fans will operate at the
minimum duty cycle when the source temperature is lower than the limit.
Configuration options: [0] – [100]
Chassis Fan 1(~3) Min Duty Cycle (%)
Allow you to set the minimum fan duty cycle. When the temperature is lower
than the lower limit, chassis fans will operate at the minimum duty cycle.
Configuration options: [0] – [100]
Detects the type of AIO Pump fan installed and automatically
switches the control modes.
Enables the Q-Fan control in DC mode for 3-pin fan.
Enables the Q-Fan control in PWM mode for 4-pin fan.
Temperature Source 1(~3)
These items allow you to select up to three temperature sources and AIO
Pump fan will automatically change based on the highest temperature.
Configuration options: [CPU] [MotherBoard] [VRM] [Chipset] [N/A]
500 Series BIOS Manual
®
49