Toro Z Master 4000 Series Operator's Manual page 30

Figure 43
1. Blower assembly
2. Lower tube
g003423
3. Latch
9. Using the 3 holes or indentations in the upper
tube as a template, drill 3 holes (7/32-inch
diameter) where the upper and lower tubes join
together (Figure
1. Bagger hood
2. Upper tube
3. Drill 7/32-inch diameter
holes here (use the upper
tube as a template).
10. Remove the lower tube from the blower.
30
44).
Figure 44
4. Lower tube
5. Blower assembly
g003390