Toro Z Master 4000 Series Operator's Manual page 24

1. Align the pivot pin on the blower with the
pivot-pin hole in the mower deck
2. Lower the blower and slide the pivot pin into the
pivot hole (Figure
Note:
Ensure that the belt remains positioned
in the blower pulley.
Figure 30
1. Blower assembly
2. Deck
3. Secure the latch to the blower assembly using
the hex-head bolt (3/8 x 1-1/2 inches), spacer,
and locknut (3/8 inch) as shown in
and Figure 32.
(Figure
30).
3. Pivot hole
4. Blower-pivot pin
Figure 31
30).
g376058
24
Figure 31
60-inch shown
g376336