How To Configure Tcp/Ip; Windows 8; Windows 7 - Buffalo AirStation WXR-1900DHP User Manual

How to Configure TCP/IP

Windows 8

To configure TCP/IP in Windows 8, follow the procedure below.
1
Open Control Panel.
2
Click Network and Internet.
3
Click Network and Sharing Center.
4
Click Change Adapter Settings on the left side menu.
5
Right-click the network adapter, then click Properties.
6
If the User Account Control screen opens, click Yes or Continue.
7
Select "Internet Protocol Version 4 (TCP/IPv4)" then click Properties.
8
To have DHCP set your IP address settings automatically, check "Obtain an IP address automatically" and "Obtain
DNS server address automatically".
Alternately, you can configure the settings manually. Example:
If the router's IP address is 192.168.11.1,
IP address: 192.168.11.80
Subnet mask: 255.255.255.0
Default gateway: 192.168.11.1
Preferred DNS server: 192.168.11.1
Alternate DNS server: leave blank
9
Click OK.

Windows 7

To configure TCP/IP in Windows 7, follow the procedure below.
1
Open Control Panel.
2
Click Network and Sharing Center.
3
Click Change Adapter Settings on the left side menu.
4
Right-click the network adapter, then click Properties.
5
If the "User Account Control" screen opens, click Yes or Continue.
6
Select "Internet Protocol Version 4 (TCP/IPv4)" then click Properties.
113