Adding An Airstation To An Existing Wireless Network As A Client - Buffalo AirStation WXR-1900DHP User Manual

Adding an AirStation to an Existing Wireless Network as a Client

In a network that already has a wireless access point, the AirStation can serve as a wireless client. It can connect
wirelessly to the existing wireless network and other devices can be connected to its Ethernet ports.
To configure the AirStation as a wireless client, follow the procedure below:
1
Slide the mode switch on the bottom of the AirStation to "WB".
2
Open Settings and navigate to Wireless - Wireless Bridge.
3
Under "Manual Connection", click Open.
4
Select your access point (AP) from the list of detected wireless devices.
5
Select settings for "Wireless Authentication" and "Encryption" to match the AP's settings, then click OK.
The AirStation is now connected as a wireless client, and Ethernet devices connected to it can use the AP's Internet
connection.
63