Buffalo AirStation WXR-1900DHP User Manual page 95

6
Click Register in "Connected Client's List", then add all MAC addresses to the list.
7
Click "Log out" button on the upper right.
Step 2: Connect the Wireless Bridge to the AirStation
1
Set the mode switch on the bottom of the AirStation to "WB".
After a minute, confirm that the LEDs appear as below:
Power LED: lit white
Wireless LED: blinks orange
Internet access LED: off
Router LED: off
Note: If the LEDs do not appear as above, press the reset button for 3 seconds to restore the AirStation to the factory
default.
2
Change the PC's IP address to "192.168.11.xxx" (e.g. 192.168.11.135).
3
Connect the wireless bridge to the PC with an Ethernet cable.
4
Open a web browser and enter "192.168.11.100".
95