Multicast Control; Guest Accounts - Buffalo AirStation WXR-1900DHP User Manual

Table of Contents

Multicast Control

Configure restrictions on unnecessary multicast packets sent to the wireless LAN port here.

Wireless - Multicast Control

Snooping

Multicast Aging Time

Configure the AirStation's guest accounts here.

Wireless - Guest Accounts (Router and Access Point Modes Only)

Guest Accounts

Guest User

Authentication

Guest Account LAN IP

Address

Guest Account DHCP

Server

If enabled, snooping supervises multicast administrative packets such as IGMP and

restricts unnecessary multicast transfers to wired or wireless ports.

Set the time to hold the data from multicast snooping in the range of 1 to 3600

(seconds). Enter a value bigger than the IGMP/MLD query interval.

Enable or disable the guest accounts.

This sets whether authentication is performed for guest users.

This sets the LAN-side IP address for the guest accounts.

This sets whether IP addresses are automatically assigned for devices connected to the

guest accounts.

Table of Contents