Electrical Requirements - KitchenAid KEC50C Manual

STAND MIXER SAFETY
17. Do not use toxic products (alcohol, ammonia, stain
removers, etc.) or steel sponges to clean the Stand
Mixer. These products may damage the Stand Mixer or
leave undesirable odors.
18. Refer to the "Care and Cleaning" section for
instructions on cleaning the surfaces in contact with
food.
19. This appliance is intended to be used in household
and similar applications such as:
- staff kitchen areas in shops, offices or other working
environments;
- farmhouses;
- by clients in hotels, motels and other residential
type environments;
- bed and breakfast type environments.
SAVE THESE INSTRUCTIONS

ELECTRICAL REQUIREMENTS

Electrical Shock Hazard
Plug into an earthed outlet.
Do not remove earth prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in
death, fire, or electrical shock.
W11330575A.indb 7
KEC97A3S Series, KEC50CVP Series
Volts:
220 V
Hertz
: 60 Hz
Wattage:
500 W
KEC97A3A Series, KEC50CVA Series
Volts:
127 V
Hertz
: 60 Hz
Wattage:
500 W
NOTE: Use an appropriate outlet to plug
in your Stand Mixer� If the plug does not fit
in the outlet, contact a qualified electrician�
Do not modify the plug in any way� Do not
use adapters or T's�
Do not use an extension cord� If the power
supply cord is too short, have a qualified
electrician or service technician install an
outlet near the appliance�
STAND MIXER SAFETY | 7
3/5/2019 10:50:44 AM