Table of Contents
Advertisement
SIDOOR functions
3.4 Extended functions
3.4.6
Maintenance data
Description of function
For maintenance purposes, the SIDOOR controller determines operating data of the
controller. These values can be used to determine the service life and frequency of use.
The maintenance data can be queried via the SIDOOR SERVICE TOOL (Page 83).
3.4.6.1
Operating data
Based on the operating data, the service life and frequency of use of the motor and the door
control unit can be determined and evaluated for maintenance purposes.
The operating data can be deleted via the operating menu (see "Service->Maintenance data-
>Delete operating data").
The following operating data is determined:
• Number of openings
• Number of obstructions
• Number of learn runs
• Number of power failures
• Number of operating hours
Number of openings
The counter is incremented when an opening movement is started from the closed position.
The counter reading is stored retentively.
Number of obstructions
The counter is incremented when the door moves against an obstacle in closing direction.
The counter reading is stored retentively.
Number of learn runs
The counter is incremented when a learn run has been successfully completed. The counter
reading is stored retentively.
Number of power failures
The counter is incremented with a valid parameter set after a restart of the controller. The
counter reading is stored retentively.
32
SIDOOR ATD400T door control units for railway applications
System Manual, 06/2020, A5E42201947-AB
Advertisement
Table of Contents
