Fig.26
Fig.27
Fig.28
Fig.29
Fig.30
Fig.31
Changing of Burner Injector Orifice
With the complete burner assembly removed as per
fig. 28, 29, 30.
1. Disconnect the 8mm gas feed pipe from the
control to injector. (see fig. 31)
2. Slacken the 8mm gas feed pipe to the injector at
the control.
3. Remove Injector from burner.
Removal of Pilot Injector
1. Unscrew the two
pilot burner. (see fig. 32)
2. Disconnect the 4mm gas feed pipe.
Fig.32
12
1
/
" slotted head screws from
4