Advertisement
5)
Insert the protrusions under the guide into the Paper
Size holes.
6)
Insert the Paper Tray protrusions into the Paper Size
holes on top of the guide and tighten the screw.
7)
Pull the handle for the end guide up (
Paper Size while moving the handle along the groove
(
), and lower the handle (
2
Note
The groove on the left side of the end guide 8.5" is not used.
4.
Fan the paper well and load sheets with the printed side fac-
ing up, and the paper edges aligned in the direction of the
arrow.
5.
Close the end guide completely.
6.
Push in the Paper Tray.
Special Media Setting
Hole Punched Paper
Orientation: Place the holes of paper on the right side when you face the front side of machine.
), align with the
1
).
3
1
3
2
Loading Paper
5
Advertisement
