Related Manuals for FujiFilm Apeos 7580
Summary of Contents for FujiFilm Apeos 7580
- Page 1 Reference Guide Optional Units Apeos 7580 Apeos 6580 Apeos 5580 November 2022 GM1669E1-1 Edition 1 FUJIFILM Business Innovation Corp.
- Page 2 Preface A guide describing the operations for optional units, such as the Finisher. Refer • Descriptions for the following optional products are provided in different guides. - Offset catch tray, Simple catch tray: “Reference Guide- Main Unit” - Wireless Network Kit, Print / scan / FAX function-related products: “Reference Guide - Operations” - Face authentication system, IC card reader: Official site of our company •...
- Page 3 High Capacity Feeder B1 Device Components Component Function Remaining Volume Display You can check the remaining paper volume. High Capacity Tray (Paper Tray 6) Load paper here. Top Cover Open this cover to clear paper jams. Main Specifications Item Specification Paper size , Letter (8.5 x 11") , JIS B5...
- Page 4 Loading Paper After loading paper, configure the Paper Tray settings on the Home screen. Refer For details, refer to “Setup” in “Reference Guide - Operations”. Images are printed on the face side of the loaded paper. Pull out the Paper Tray toward you until it stops. Remove any paper remaining in the Paper Tray.
- Page 5 Insert the protrusions under the guide into the Paper Size holes. Insert the Paper Tray protrusions into the Paper Size holes on top of the guide and tighten the screw. Pull the handle for the end guide up ( ), align with the Paper Size while moving the handle along the groove ), and lower the handle ( Note...
- Page 6 Paper Jams If paper is jammed, the machine stops and an alarm sounds. Follow the instructions displayed on the screen to remove the jammed paper. Gently remove the paper being careful not to tear it. If paper is torn while it is being removed from the machine, remove all the torn pieces making sure that none remain inside the machine.
- Page 7 Inside of the Upper Cover Hold the handle and move the unit all the way to the left. Pull the handle ( ) and open the cover ( Remove the jammed paper. Close the cover. Move the unit to the right and connect it with the main unit. Paper Jams...
- Page 8 High Capacity Feeder C1-D2 Device Components / Caution Labels Component Function Right Cover Open this cover to clear paper jams. High Capacity Tray (Paper Load paper here. Tray 6) High Capacity Tray (Paper Load paper here. Tray 7) Bypass Tray (Paper Tray 5) Refer 'Reference Guide-Main Unit' Remaining Volume Display...
- Page 9 Item Specification Paper weight (g/m High Capacity Tray 52 to 200 Bypass Tray 52 to 250 Tray capacity (sheets) 2,470 x 2 trays + Bypass Tray 300 (Max 5,240) Dimensions (mm) Width 597 x Depth 661 x Height 930 Weight (kg) Device Components / Caution Labels...
- Page 10 Loading Paper After loading paper, configure the Paper Tray settings on the Home screen. Refer For details, refer to “Setup” in “Reference Guide - Operations”. Loading to High Capacity Tray Images are printed on the face side of the loaded paper. Pull out the Paper Tray toward you until it stops.
- Page 11 Special Media Setting Hole Punched Paper Orientation: Place the holes of paper on the right side when you face the front side of machine. Loading to Bypass Tray Images are printed on the face side of the loaded paper. Note If the paper guide width is narrower or wider than the paper, it may cause paper jams.
- Page 12 Paper Jams If paper is jammed, the machine stops and an alarm sounds. Follow the instructions displayed on the screen to remove the jammed paper. Gently remove the paper being careful not to tear it. If paper is torn while it is being removed from the machine, remove all the torn pieces making sure that none remain inside the machine.
- Page 13 Paper Jams at [1b] Open lever [1b] to the right ( ), turn knob [1c] clock- wise ( ) and remove the jammed paper ( Return lever [1b]. Paper Jams at [1d] Open lever [1d] upward ( ) and remove the jammed paper ( Return lever [1d].
- Page 14 Inserter Device Components Component Function Error Indicator When paper jam occurs, the indicator is turned on. When the priority device indicator (top lamp) blinks, first of all perform the paper jam operation. Curl correction button Paper curl is corrected when there is any. Inserter Tray Load paper to be used as an interleaf or cover.
- Page 15 Main Specifications Item Paper size A3, 11 x 17" Note Can be used by inputting the size. Paper weight (g/m 52 to 250 Note If Saddle stitch / Single fold is used for the following papers, folding displacement and/or paper wrinkles occur. Use Bypass Tray for these papers.
- Page 16 Curl Correction The curl correction button is used to correct paper curl caused by heat and/or pressure. The curl correction button can be operated regardless of the machine state when the machine is ON. Note • This curl correction function can be used during printing. Fine correction according to the paper proper- ties can be made from control panel.
- Page 17 Operations and Functions of Curl Correction Press the <AUTO> button to enter the [AUTO] mode. Indicator Mode Function AUTO Curl correction is automatical- ly performed. It is recommended to use this mode basically. Optimum curl correction is performed according to the paper size and output direc- tion.
- Page 18 Loading Paper Load paper (blank paper or printed paper) to be used as an interleaf or cover. Inserter Tray is used to load paper used as an interleaf or cover, and print cannot be performed. Note • After removing all the paper from the Tray, and then load the paper again together with the paper you want to add.
- Page 19 Paper Jams Note The error indicator at the top of the machine is turned on. When the priority device indicator (top lamp) blinks, first of all perform the paper jam operation. If paper is jammed, the machine stops and an alarm sounds. Follow the instructions displayed on the screen to remove the jammed paper.
- Page 20 When Indicator E3 is Turned on Open the Cover. Open lever [1d] downward ( ), turn knob [1e] counter- clockwise ( ), and remove the jammed paper ( Note Jammed paper may be hidden at the upper section. Return lever [1d]. If you have difficulty in removing the papers, open lever [1a] upward ( ), turn knob [1e] clockwise (...
- Page 21 Folder Unit Device Components / Caution Labels Bottom Component Function Tri-Fold Output Tray Button Press the button to remove paper from the Tri-Fold Output Tray. The Tri-Fold Output Tray is opened when the lamp stops blink- ing and comes on and the lock is released. Cover Open this cover to clear paper jams.
- Page 22 Main Specifications Item Specification Z-Fold Half Sheet Paper size A3, 11 x 17", JIS B4 Paper weight 60 to 90 (g/m 64 to 90 Tri-fold (C Fold/Z Fold) Paper size A4, Letter (8.5 x 11") Paper weight 60 to 90 (g/m 64 to 90 Paper capacity (sheets)
- Page 23 Paper Jams Note On CD2, the error indicator at the top of the Finisher is turned on. When the priority device indicator (top lamp) blinks, first of all perform the paper jam operation. If paper is jammed, the machine stops and an alarm sounds. Follow the instructions displayed on the screen to remove the jammed paper.
- Page 24 When Indicator E11 is Turned on Open lever [2g] to the right ( ), turn knob [2c] counter- clockwise ( ), and remove the jammed paper ( Return lever [2g]. When Indicator E12 is Turned on Pull out the Tri-Fold Output Tray [2d]. Open lever [2e] to the right ( ), turn knob [2c] counter- clockwise (...
- Page 25 Finisher C In this guide, “Finisher C4/C5” and “Finisher C4/C5 with Booklet Maker” are generally referred to as “Finisher C”. Device Components / Caution Labels Component Function Transport unit S Front Cover Open this cover to clear paper jams. Hole Punch Waste Container Punched pieces go in here.
- Page 26 Main Specifications Item Specification Type Top Output Tray Sort (Offset available) / Stack (Offset available) Finisher Tray Sort (Offset available) / Stack (Offset available) Booklet Tray Sort / Stack Paper size Top Output Tray A3, 12 x 18" (305 x 457 mm) Postcard (100 x 148 mm) Finisher Tray A3, 12 x 18"...
- Page 27 Item Specification Hole Punch Paper size A3, 11 x 17" (with Punch JIS B5 Unit) Paper weight 52 to 200 (g/m Number of 2 holes / 4 holes or 2 holes / 3 holes (US Specifications) punched holes Note The number of punched holes that can be processed differs for each Paper Size.
- Page 28 Number of Sheets That can be Stapled (Approximation) Side Stitch Paper weight (g/m Saddle stitch Staple Staple-Free Staple 52 to 59 50/65 60 to 71 72 to 80 81 to 90 91 to 105 106 to 128 129 to 150 151 to 176 177 to 200 x: Ejection is not available.
- Page 29 Staple Cartridge Replacing Staple Cartridge Consumables recommended by our company are manufactured under the standards suitable for this machine. Using consumables not recommended by our company may affect print quality or perfor- mance provided by the product. Use consumables that our company recommends for this machine. To place orders for consumables, take a note of the part number and contact your local representa- tive.
- Page 30 Staple Jams If paper is not being stapled or if staples are bent, follow the procedures mentioned in the following pages. If the issue isn't resolved even after the procedure, contact our customer support center or sales agency. Paper is not stapled Staple is bent If the staple looks like any of the following images, contact our customer support center or sales agency.
- Page 31 Staple Cartridge for Side Stitch Tap [Device Status] > [Supplies] > [Staple Cartridge (R1)] > [Check] on the Touch Panel Display. Confirm that the machine is not operating, and open the Cover. Hold the handle and remove the Staple Cartridge. When using the Staple Unit 65 Sheets, flip the handle down and remove the Staple Cartridge.
- Page 32 Staple Cartridges for Saddle Stitch Confirm that the machine is not operating, and open the Cover. Pull out Booklet Maker [4]. Hold the handle of the Staple Cartridge (R2) (R3) and pull it out. Remove the jammed staples. Insert the Staple Cartridge into the original position. Hold the handle and lightly press it up until you hear a click.
- Page 33 Paper Jams If paper is jammed, the machine stops and an alarm sounds. Follow the instructions displayed on the screen to remove the jammed paper. Gently remove the paper being careful not to tear it. If paper is torn while it is being removed from the machine, remove all the torn pieces making sure that none remain inside the machine.
- Page 34 Booklet Tray Open the Cover. Remove the jammed paper that sticks out from the exit of the Tray to the right direction. If you have difficulty in removing the papers, turn knob [4a] clockwise ( ), and remove the jammed paper that sticks out from the exit of the Tray ( Close the cover.
- Page 35 Booklet Maker Pull out Booklet Maker [4]. Turn knob [4a] counterclockwise ( ) and remove the jammed paper ( Push in the Booklet Maker [4]. Close the cover. Paper Jams...
- Page 36 Finisher D In this guide, “Finisher D6” and “Finisher D6 with Booklet Maker” are generally referred to as “Finish- er D”. Device Components / Caution Labels Finisher Component Function Hole Punch Waste Container Punched pieces go in here. Refer For the discard method of waste in the waste container, refer to the label affixed on the machine.
- Page 37 Component Function Booklet Tray Saddle stitch and Single fold paper is ejected. Cover Open this cover to clear paper jams, replace the Staple Cartridge, remove jammed staples or dispose of cut pieces for punched holes. Staple Waste Container Staple waste goes in here. Staple Cartridge for side stitch This unit is used to replace staples for side stitch.
- Page 38 Item Specification Staple Maximum number of sheets of paper Note (sheets) 65 sheets for larger sized than A4 and Letter (8.5 x 11"). Paper size A3, 11 x 17" JIS B5 Paper weight 52 to 200 (g/m Stapled location 1 location, 2 locations, 4 locations Hole Punch Paper size A3, 11 x 17"...
- Page 39 Number of Sheets That can be Stapled (Approximation) Side Stitch Paper weight (g/m Saddle stitch When A4 size or less When exceeding A4 size 52 to 59 60 to 71 72 to 80 81 to 90 91 to 105 106 to 128 129 to 150 151 to 176 177 to 200...
- Page 40 Outputting Paper Top Output Tray Loading Guide Place it on the Top Output Tray when using an envelope. Paper Curl • If A5 is curled upward, a paper jam may occur. For Inserter, set the upward curl correction of Inserter. •...
- Page 41 Staple Cartridge Replacing Staple Cartridge / Staple Waste Container Consumables recommended by our company are manufactured under the standards suitable for this machine. Using consumables not recommended by our company may affect print quality or perfor- mance provided by the product. Use consumables that our company recommends for this machine. To place orders for consumables, take a note of the part number and contact your local representa- tive.
- Page 42 Staple Jams If paper is not being stapled or if staples are bent, follow the procedures mentioned in the following pages. If the issue isn't resolved even after the procedure, contact our customer support center or sales agency. Paper is not stapled Staple is bent If the staple looks like any of the following images, contact our customer support center or sales agency.
- Page 43 Staple Cartridge for Side Stitch Confirm that the machine is not operating, and open the Cover. Pull out [R1]. Note After removing the Staple Cartridge, check to make sure that there is no staple inside of the Finisher. Open the cover of the unit and remove the jammed staples. Insert the unit into the original position.
- Page 44 Remove the jammed staples. Insert the Staple Cartridge into the original position. Hold the handle and lightly press it up until you hear a click. Note Align the “” marks. Push in the Booklet Maker [3]. Close the cover. When Staple Cartridge for Side Stitch Comes off If the Staple Cartridge comes off from the unit due to fall during operation, etc., perform the following steps.
- Page 45 Turn it over as the handle is at the moved position and take out the Staple Cartridge from the unit. Remove the staples that stick out from the Staple Cartridge. Caution Please be very careful not to hurt your fingers, etc. when separating staples. Insert the Staple Cartridge into the unit.
- Page 46 Paper Jams Note The error indicator at the top of the machine is turned on. When the priority device indicator (top lamp) blinks, first of all perform the paper jam operation. If paper is jammed, the machine stops and an alarm sounds. Follow the instructions displayed on the screen to remove the jammed paper.
-
Page 47: Table Of Contents
When Indicator E2 is Turned on Open lever [1c] to the right ( ), turn knob [1e] clock- wise ( ), and remove the jammed paper ( Note Jammed paper may be hidden at the upper section. Return lever [1c]. When Indicator E3 is Turned on Remove the jammed paper that sticks out from the exit of the Top Output Tray. -
Page 48: Return Lever [1C]
When Indicator E6 is Turned on Remove the jammed paper that sticks out from the exit of the Finisher Tray. Open and close the cover. Close the cover. Check the curl direction of the jammed paper and correct the curl. Refer “Curl Correction”... - Page 49 When Indicator E8 is Turned on Pull out Booklet Maker [3]. Note Confirm that paper is not jammed at the lever [3a] before pull- ing it out. Turn knob [3b] counterclockwise ( ) and remove the jammed paper ( Push in the Booklet Maker [3]. When Indicator E9 is Turned on Turn knob [3b] clockwise ( ) and remove the jammed...