7.2. Setting Up the FZ5 Sensor Controller
Set up the FZ5 Sensor Controller.
7.2.1. Parameter Settings
Set the parameters for the FZ5 Sensor Controller.
1
Connect the Camera, Monitor,
USB connected mouse, and the
LAN cable to the FZ5 Sensor
Controller.
Connect the power supply cable
to the Power terminal.
2
Turn ON the power supply to the
FZ5 Sensor Controller.
3
The Language setting Dialog
Box is displayed on the Monitor
connected to the FZ5 Sensor
Controller only at the initial start.
Select English and click the OK
Button.
Confirm that your desired
Language is selected and click
the Yes Button.
4
Select System Settings from
the Tool Menu on the FZ-PanDA
Dialog Box that are shown on
the Monitor connected to the
FZ5 Sensor Controller.
7.EtherNet/IP Connection Procedure
11