Mitsubishi FR-HEL Series Instruction Manual page 15

4. Additional Instructions
Also note the following points to prevent an
accidental failure, injury, electric shock, etc.
Assumes that incorrect handling may cause
an accidental failure, injury, electric shock,
etc.
1) Transportation and installation
CAUTION
• When carrying products, use correct lifting
gear to prevent injury.
• Do not install or operate the option unit if it
is damaged or has parts missing.
• Do not stand or rest heavy objects on the
product.
• Check that the mounting orientation is
correct.
• Prevent other conductive bodies such as
screws and metal fragments or other
flammable substance such as oil from
entering the option.
• As the option is a precision instrument, do
not drop or subject it to impact.
• Use the inverter under the following
environmental conditions. Otherwise, the
inverter may be dameged.
Ambient -10°C to 50°C
Temperature (non-freezing)
Ambient 90% RH or less
humidity (non-condensing)
Storage
-20°C to 65°C*
temperature
Indoors (free from
Atmosphere corrosive gas, flammable
gas, oil mist, dust and dirt)
Maximum 1000m above sea
Altitude/
level 5.9m/s
vibration
(conforming to JIS C 60068-
2-6)
*Temperature applicable for a short time, e.g.
in transit.
2) Trial run
CAUTION
• Before starting operation, confirm and
adjust the parameters. A failure to do so
may cause some machines to make
unexpected motions.
3) Operation
WARNING
• Do not modify the equipment.
• Do not perform parts removal which is not
instructed in this manual. Doing so may
lead to fault or damage of the inverter.
A-2
2
or less
4) Disposal
CAUTION
• Treat as industrial waste.
(5) General instruction
All illustrations given in this manual may
have been drawn with covers or safety
guards removed
description. Before starting operation of the
product, always return the covers and
guards into original positions as specified
and operate the equipment in accordance
with the manual.
to provide in-depth