Tiger CSS Original Instruction Manual

Safety screw cam clamp

Advertisement

Quick Links

- PLEASE PASS ONTO OPERATOR
Sticker here
www.tigerlifting.com
Instruction Guide Tiger CSS En 202201 v2.0

Advertisement

Table of Contents
loading

Summary of Contents for Tiger CSS

  • Page 1 - PLEASE PASS ONTO OPERATOR Sticker here www.tigerlifting.com Instruction Guide Tiger CSS En 202201 v2.0...
  • Page 2: Table Of Contents

    Due to our policy of continual product development, dimensions, weights and specifications may change without prior notice. © Copyright Tiger Lifting UK Limited. No part of this manual shall be reproduced, transmitted, transcribed, translated into any language human or electronic, stored in any electronic retrieval system, in any form without the written permission of Tiger Lifting UK Limited, Morpeth, UK 1.
  • Page 3 Never allow a load attached to the clamp to swing or spin unintentionally. Never work under suspended loads. www.tigerlifting.com Page 2 of 14 Instruction Guide Tiger CSS En 202201 v2.0...
  • Page 4: Function/Operation

    2. Function/Operation The Tiger CSS Safety Screw Cam Clamp is suitable for many applications. It is particularly useful for lifting and pulling sheet metal, girders, and steel constructions. It is fitted with a moveable Cam on the thread spindle which provides a powerful clamping force on the object being moved.
  • Page 5 Note - When clamps are used continuously over long periods of time, check the clamping force regularly and do not overload the clamp. www.tigerlifting.com Page 4 of 14 Instruction Guide Tiger CSS En 202201 v2.0...
  • Page 6: Inspection

    The intervals of inspection must be determined by the individual application and are based upon the type of service to which the clamp will be subjected. In the event of any defects refer the clamp to a Competent Person for thorough examination. www.tigerlifting.com Page 5 of 14 Instruction Guide Tiger CSS En 202201 v2.0...
  • Page 7 Place the assembled Spherical Based Cam, Cam Holder, and Collar in the main body, and fix them with Hex. Hole Head Screw. Insert and turn Screw into the screw part of the main body. www.tigerlifting.com Page 6 of 14 Instruction Guide Tiger CSS En 202201 v2.0...
  • Page 8 Visually check or use When found visually. colour dyes to find cracks at the teeth bottom. Visually check for When any broken tooth is found. broken teeth www.tigerlifting.com Page 7 of 14 Instruction Guide Tiger CSS En 202201 v2.0...
  • Page 9 0.2mm resulting in rattling. Stopper pin Visually check or When deformation exceeds 0.2mm. Replace measure for deformation. When the movement of the Spherical Based Cam is not smooth. www.tigerlifting.com Page 8 of 14 Instruction Guide Tiger CSS En 202201 v2.0...
  • Page 10: Maintenance

    When the product comes to the end of its lifecycle, after taking the unit out of service, recycle or dispose of the parts of the unit respecting local and national environmental regulations. www.tigerlifting.com Page 9 of 14 Instruction Guide Tiger CSS En 202201 v2.0...
  • Page 11: Manufacturer Testing And Verification

    6,300 12,600 Declaration of Conformity Tiger CSS Clamps have a 4:1 factor of safety. They are tested in line with the requirements within applicable EN13155:2003+A1:2009. All items comply with the essential health and safety requirements of the Machinery Directive 2006/42/EC.
  • Page 12: Exploded Diagram

    Hex. Hole Head Screw Spherical Based Cam Stopper Pin Cam Holder Steel Ball Guide Pin Collar Disk Spring 5 (4 for 6.3t) Hex. Hole Head Bolt Spring Washer www.tigerlifting.com Page 11 of 14 Instruction Guide Tiger CSS En 202201 v2.0...
  • Page 13: Product Warranty And Warnings

    The Company will return repaired or replacement products at The Company’s expense, but if it is determined there is no defect, or that the defect resulted from causes not within the scope of Tiger Lifting’s warranty, then the Customer must bear the cost of storing and retrieving the product.
  • Page 14 Owner’s Notes www.tigerlifting.com Page 13 of 14 Instruction Guide Tiger CSS En 202201 v2.0...
  • Page 15 Owner’s Notes www.tigerlifting.com Page 14 of 14 Instruction Guide Tiger CSS En 202201 v2.0...
  • Page 16 © Copyright Tiger Lifting UK Limited. No part of this manual shall be reproduced, transmitted, transcribed, translated into any language human or electronic, stored in any electronic retrieval system, in any form without the written permission of Tiger Lifting UK Limited, Morpeth, UK www.tigerlifting.com...

This manual is also suitable for:

Css-005Css-010Css-020Css-032Css-063

Table of Contents