2. Function/Operation The Tiger CPU Clamp can be used for lifting and transporting steel plates and structures from all positions (horizontal, vertical and sidelong). As well as transporting plate, this clamp is well-suited to turning over steel structures and welded constructions.
Examine the function levers ability to engage and disengage the jaws. • Examine for loose or missing fasteners, stops or nameplates. • Examine for corrosion. • Examine for illegible labels and markings. www.tigerlifting.com Page 3 of 6 Instruction Guide Tiger CPU En 201901 v1.0...
10,000 Declaration of Conformity Tiger CPU Clamps have a 4:1 factor of safety. They are tested in line with the requirements within applicable sections of ASME B30.20, the Australian Standard AS 4991and EN13155:2003+A1:2009. All items comply with the essential health and safety requirements of the Machinery Directive 2006/42/EC.
The Company will return repaired or replacement products at The Company’s expense, but if it is determined there is no defect, or that the defect resulted from causes not within the scope of Tiger Lifting’s warranty, then the Customer must bear the cost of storing and retrieving the product.
Clamping Pad Screw Roll pin Function Lever Connecting Block Pin Pivoting Shackle Pin Rollpin Function Block Pulling Spring Rollpin Connecting Plate Clamping Jaw Rollpin Jaw Pin Shim Washer www.tigerlifting.com Page 6 of 6 Instruction Guide Tiger CPU En 201901 v1.0...