Table of Contents
Advertisement
LEVELLING THE CUTTING DECK
1. Stop the
product.
2. Lift the side discharge chute.
NOTE: If the mulch plug is installed, unhook
the right latch from the hole on the housing.
Unhook the left latch from the stud on the
housing. Unhook the mulch cover from the
tab on the mower housing.
3. Position the blades so that the ends point
toward the
sides of the mower.
4. On the outside edge of each blade,
measure the distance from the bottom
edge of the side of the blade to the
ground.
1
2
1
3
4
1
p.21
2
3
2
31
Maintenance
Advertisement
Table of Contents
