Ryobi R80XZTR42 Manual page 14

1
Wear full eye protection, non-slip
heavy-duty gloves,
footwear, and long trousers at all times
while operating the product. Do not
operate the product when barefoot or
wearing open sandals.
6a
1
For mulching configuration, install the mulch cover. Lift the side discharge chute. Hook the left latch to the stud on the
housing. Hook the right latch to the hole on the housing. Hook the mulch cover to the tab on the mower housing. Lower down
the side discharge chute, and make sure that it is properly closed.
8
Press the center edge on the primary
battery port to release the latch.
14
Getting started
2
Insert the joystick through the dust
substantial cover. Align the holes on the joystick
with the holes on the mounting shaft.
9
Open the cover.
3
Insert the hex screws and tighten
securely with a hex key. Align the tabs
on the dust cover with the base and
press down to lock the dust cover into
place.
2
3
10
Connect each battery pack's quick-
connect plugs. These plugs connect
the battery packs to the product. Close
the cover.
3
1
2
4
1
2