W0300 Cables (Model No. Jzmsz-120W0300- ) - YASKAWA MEMOCON GL120 User Manual

3 Digital I/O Specifications
3.3.2 W0300 Cables (Model No. JZMSZ-120W0300-
3.3.2
1) Use
2) Specifications
3) Appearance
INFO
)
W0300 Cables (Model No. JZMSZ-120W0300-
(1) This Cable is used to connect external devices to the Modules listed below.
(a) 12/24-VDC 32-point Input Module (Model No. JAMSC-120DDI35400)
(b) 12/24-VDC 32-point Output Module (Model No. JAMSC-120DDO35410)
(2) The end of the Cable to the external device is loose wires.
The following table shows specifications of W0300 Cables.
Item
Model Name W0300-01
Model No. JZMSZ-120W0300-01
Length L 1.0 m
Cable
Shielded cable, 40 cores, equivalent to UL20276, AWG28 (0.08 mm
Specifications
Cable Module
Termination side
External
device
side
Insulation 100 MΩ min. at room temperature and humidity between core wires (con-
Resistance nected together) and shielding wire, and between core wires (measured
with a 500-VDC test voltage megohmmeter).
The following illustration shows the appearance of a W0300 Cable.
Connector (Module side)
The difference between the W0300 Cable and the W0302 Cable is the size of the end
which connects to the Module Connector.
Table 3.3 Specifications of W0300 Cable
Specifications
W0300-03
JZMSZ-120W0300-03
3.0 m
Connector: Connector 10140-6000EL (3M)
Shell 10640-5500-008 (3M)
Screw 3342-26 (3M)
Latch 10600-L0F0-8 (3M)
Loose wires: Wire length 150 mm with pin number label on
each wire.
Model Name
A pin number label is on each loose wire
Shielded cable
3-62
)
W0300-05
JZMSZ-120W0300-05
5.0 m
Loose wires (external device side)
150 mm
2
)
40-core
loose
wires