Quick Start With Rasexpress - Multitech MA6 Quick Start Manual

Quick Start with RASExpress

What you need to start
• The MiniArray
• A dumb terminal or an auxiliary PC (other than the MiniArray
terminal mode
• A shielded RS-232C serial cable with a female DB-9 connector on one end and a
connector to match the serial port of the terminal or auxiliary PC on the other end.
• An IP Address assigned to the MiniArray
• An IP Subnet Mask assigned to the MiniArray
• Optional: a client PC connected to the MiniArray
a browser, or MultiManager
Accessing RASExpress
(a) continue using the terminal or auxiliary PC to program other network settings into
the MiniArray
(b) re-boot the MiniArray
settings from a client PC connected to the LAN in which the MiniArray
server.
Do this using Telnet, or a browser, or MultiManager.
Method A. Do All Configuration using Terminal or Auxiliary PC
18
III Server
III
III
III
III , or
III
and then continue programming the MiniArray
III
III
III
III
III
server
III
server
III 's network and equipped with Telnet,
III
III
III
itself) that can operate in
III
's network
III
is the RAS
III
MA6