Finishing; Crystal Installation; Log, Grate, And Crystal Installation - Napoleon CONTINENTAL CEFB26H Installation And Operation Manual

5.0 finishing

EN
WARNING
!
• Power supply service must be completed prior to finishing to avoid reconstruction.
• Heat vents and air openings cannot be covered in any circumstances.
5.1

crystal installation

1. Remove glass door (see "installation" section).
2. Carefully place an even layer of small crystals on the media tray.
3. Randomly place the large crystals (Fig. 5-1).
4. Reinstall the glass door.
Large Crystals
For illustrative purposes only.
5.2

log, grate, and crystal installation

1. Remove the glass door (see "installation" section).
2. Place the grate on the media tray. Ensure it is stable.
3. Carefully place an even layer of small crystals on the media tray.
4. Place the logs (left and right) on top of the grate, using the grooves along the bottom of the logs as guides
(Fig. 5-2).
5. Reinstall the glass door.
Left Log
For illustrative purposes only.
16
W415-2971 / C / 11.18.22
note:
Multiple media options are provided.
Small Crystals
Locating Groove
Fig. 5-1
Right Log
Grate
Fig. 5-2