Renault Arcana User Manual page 211

STOP AND GO ADAPTIVE CRUISE CONTROL
8
11
10
Displays
Stop and Go adaptive cruise con-
8
trol indicator light.
9 Vehicle in front.
10 Stored safe distance
Stored cruising speed.
11
Important: you should keep
your feet near the pedals at
all times to prepare for any
event.
Switching on
Press switch 5.
Warning light
the message "Adaptive Cruise Ctl ON"
9
appears on the instrument panel, ac-
companied by dashes to indicate that
the cruise control function is activated
and waiting to store a cruising speed.
This function cannot be activated when:
– the parking brake is applied;
– the Park Assist function is already
activated ➥ 2.132.
The message "Adaptive Cruise Ctl una-
vailable" is displayed on the instrument
panel.
Activating cruise control
When the vehicle is stationary or
moving at a steady speed, press
switches 6 (SET/-) or 7 (RES/+) to acti-
vate the function and store the current
speed. The minimum cruising speed is
19 mph (30 km/h).
(3/14)
 appears in grey, and
The cruising speed 11 replaces the
dashes and cruise control is confirmed
by the appearance of the cruising
speed in green and warning light
If you attempt to activate the function at
a speed over 105 mph (170 km/h), the
message "Invalid Speed" appears and
the function remains inactive.
Once a cruising speed is stored and
the cruise control function is active,
you may lift your foot off the accelera-
tor pedal.
Note: if your vehicle speed is lower
than about 19 mph (30 km/h), the
function uses a default cruising speed
of 19 mph (30 km/h). The vehicle will
accelerate until it reaches the stored
cruising speed.
 .
2.91