Table of Contents
Advertisement
4. INSTALLATION OF GPS RECEIVER
(OPTION)
A GPS receiver board can be installed in the terminal unit IC-215.
Name: GPS receiver
Type: OP16-24
Code No.: 004-438-940
Name
Connector assy.
GPS receiver board GN-79L5A-N
Connector assy.
Pan head screw
Note: Use antistatic groves to treat items.
1. Attach connector assemblies (51065/0700-PHR7-L040 and H.FL-2LP-FHSB-A (100)) to
the GPS receiver board (GN-79L5A-N).
2. Unfasten 18 screws, six spacers, three nuts to remove the terminal unit cover.
Type
51065-0700-PHR7-L040 000-146-174
H.FL-2LP-FHSB-A (100) 000-146-259
M2x4
How to treat connectors
1. Attach the connector at right angle.
2. After connecting connector assemblies, the load
Assembling GPS receiver
20
Code No.
000-146-179
000-803-232
If not, connector pins may be bent.
on their cables should be as below.
less than 2.94N (300gf)
less than 2.94N (300gf)
Qty
Remarks
1
w/PH-7P
1
1
Mini pin
2
less than 9.8N (1kgf)
Advertisement
Table of Contents
