MAINTENANCE
SUSPENSION
SUSPENSION INSPECTION
Compress and release the suspension. Damping should
be smooth throughout the range of travel.
• Check all suspension components and mounting
fasteners for wear or damage.
• Inspect each shock body for leakage.
SPRING PRE-LOAD ADJUSTMENT
The rear shock absorber springs are adjustable. Rotate
q
the adjuster cam
either direction to increase or
decrease spring tension. Always adjust both left and right
sides equally.
Vehicle
loads
effect
requirements. Use Spanner Wrench to adjust pre-load as
necessary to avoid bottoming of the shocks.
Shock Spanner Wrench
2871095
STABILIZER BAR PIVOT LUBRICATION
1. Grease stabilizer bar pivots
until old grease is purged from the joint and new
grease appears. Inspect link isolators
2.44
suspension
spring
pre-load
q
with a grease gun
w
for cracks.
9926806 R03 - 2015 - 2016 RANGER ETX / 570 2-SEAT 2015 - 2016 RANGER 570 CREW Service Manual
SUSPENSION PIVOT POINT LUBRICATION
Grease all four front A-Arm pivot points
rear A-Arm pivot points
for service intervals or grease as needed.
Wheels removed for clarification only. Procedure can be
done with wheels installed on unit.
q
and all eight
w
. See the maintenance chart
NOTE
© Copyright Polaris Industries Inc.