MAINTENANCE
FINAL DRIVE / WHEEL AND TIRE
WHEEL AND HUB TORQUE TABLE
ITEM
Wheels Nuts
Front Hub Nut
Rear Hub Nut
CV SHAFT BOOT INSPECTION
Inspect the CV shaft boots in the front and rear for
damage, tears, wear, or leaking grease. If the rubber
boot exhibits any of these symptoms, replace the boot.
Refer to Final Drive for CV boot replacement.
2.36
SPECIFICATION
Torque: Steel Wheels:
36 ft-lbs (49 Nm)
Aluminum Wheels:
30 ft-lbs + 90º (41 Nm +
90º)
90 ft-lbs (122 Nm)
110 ft-lbs (150 Nm)
9926806 R03 - 2015 - 2016 RANGER ETX / 570 2-SEAT 2015 - 2016 RANGER 570 CREW Service Manual
WHEEL REMOVAL
RE-
DESCRIP-
NOTES
F.
TION
q
Wheel Nuts
Torque: Steel Wheels:
36 ft-lbs (49 Nm)
Aluminum Wheels:
30 ft-lbs + 90º (41 Nm + 90º)
w
Washers
1. Stop the engine, place the transmission in gear and
chock wheels.
2. Loosen the wheel nuts slightly.
3. Elevate the side of the vehicle by placing a suitable
stand under the footrest frame.
4. Remove the wheel nuts and washers and remove
the wheel.
© Copyright Polaris Industries Inc.