Starter One-Way Clutch Installation; Flywheel Installation - Polaris RANGER ETX 2015 Owner's Manual

STARTER ONE-WAY CLUTCH
INSTALLATION
1. Install one-way clutch in clutch hub with flange of
q
clutch facing the flywheel.
NOTE
The one-way clutch can be installed into the hub
incorrectly. This will cause engine cranking issues.
2. Clean screw threads in flywheel to remove all oil or
grease.
3. Apply Loctite® 272™ on the one way clutch retaining
w
bolts threads . Place hub on flywheel and install
bolts.
4. Torque screws to specification.
TORQUE
One Way Clutch Retaining Bolts:
9 ft-lbs (12 Nm) Apply Loctite® 272™
9926806 R03 - 2015 - 2016 RANGER ETX / 570 2-SEAT 2015 - 2016 RANGER 570 CREW Service Manual
© Copyright Polaris Industries Inc.
ENGINE / COOLING SYSTEM

FLYWHEEL INSTALLATION

q
1. Clean the threads , taper
crankshaft to remove all oil or grease.
r
2. Clean flywheel taper with alcohol to remove all oil
or grease.
3. Apply a small amount of PS4 engine oil to the flat
t
area on the MAG side crankshaft. DO NOT apply
engine oil to the crankshaft taper.
4. Rotate crankshaft so the flywheel key
upward.
w e
and flat of
3
y
is facing
3.171