Motorola WA840GP User Manual page 69

Configuration
Step 2: Under Protocol, select the protocol which applies to the communications to be
restricted.
Step 3: Under Destination Port Range, enter the port(s) to be restricted.
Step 4: Under From Day and To Day, select the first day the restrictions should be in
place, and then the first day the restrictions should no longer be in place.
Step 5: Under From Hour and To Hour, select the start and stop times of the restrictions
that will be in place.
Step 6: At the end of each line, check the Enabled box to engage the filters.
Step 7: At the bottom of the page, click the Apply action button.
WA840
Section 3
3-35