Configuration
Options related to: OPTIMIZING WAN ROUTING
Field
Connection
Shows the state of the selected connection.
Status:
(DISPLAY ONLY)
IP Address
Shows the time left on the current IP address leased to the WA840.
Expires In:
Shows Expired when address has elapsed.
(DISPLAY ONLY)
Static Routes:
Sets static routes to up to five specific clients over the broadband
connection.
(ADVANCED)
For each route, a Destination IP Address, Subnet Mask, and
Gateway must be entered, along with the number of intermediate
routers (or "Metric") between this router and the client.
FACTORY DEFAULT:
WA840
NOTE: These settings are only used if the Operation Mode on
the BASIC Page is set to Router.
(blank)
Description
Section 3
3-23