Advanced Corded Base Settings; Set The Corded Base Name; Set The Display Language; Set The Dial Mode - Motorola L402C User Manual

6.3

Advanced Corded Base Settings

6.3.1

Set the corded base name

Personalize your corded base with a name or location
like Peter or Bedroom. Maximum 12 characters are
supported.
P ,
1. Press and
P ,
2. Press and
P
3. Press and edit the corded base name.
P
4. Press to save.
NOTE
The corded base name will be displayed in idle screen.
6.3.2

Set the display language

You can change the display language. When the menu
language is changed, the voice prompt language of
answering machine will also be changed accordingly.
P ,
1. Press and
P ,
2. Press and
P ,
3. Press and
P
4. Press to save.
6.3.3

Set the dial mode

The default dialing mode is suitable for your country and
network operator. It is unlikely that you should need to
change this setting unless advised to do so.
30
Settings
to select .
Base Name
to select .
Settings
to select .
Language
to select .
to the language you want.
P ,
1. Press and
P
2. Press to select
P ,
3. Press and
P
4. Press to save.
NOTE
If pulse mode is selected, press
pulse to tone dialing temporarily when dialing out. After
the call is ended, the dial mode will resume to pulse.
6.3.4

Set the flash time

600ms
The default flash time is
need to change this setting unless advised to do so.
P ,
1. Press and
P ,
2. Press and
P ,
3. Press and
(8 options are available:
700ms
and )
P
4. Press to save.
6.3.5

Set the area code

P ,
1. Press and
P ,
2. Press and
P
3. Press and enter the area code (3-digit only).
P
4. Press to save.
Settings
to select .
Dial Mode
.
Tone Pulse
to select or .
*
to switch from
. It is unlikely that you should
Settings
to select .
Flash Time
to select .
to the flash time you want.
90 100 110 250 300 400
, , , , , ,
Settings
to select .
Area Code
to select .
Personal Settings
600