Advanced Settings; Set The Dial Mode; Set The Flash Time; Set The Area Code - Motorola L402C User Manual

13. Advanced Settings

13.1

Set the Dial Mode

The default dialing mode is suitable for your country and
network operator. It is unlikely that you should need to
change this setting unless advised to do so.
P ,
1. Press and to select
P
DIAL MODE
2. Press to select
P ,
3. Press and to select
P
4. Press to save.
NOTE
If pulse mode is selected, press
pulse to tone dialing temporarily when dialing out. After
the call is ended, the dial mode will change back to
pulse.
13.2

Set the Flash Time

The default flash time is
should need to change this setting unless advised to do
so.
P ,
1. Press and to select
P ,
2. Press and to select
48
SETUP BS
.
.
TONE PULSE
or .
*
to switch from
600MS
. It is unlikely that you
SETUP BS
.
FLASH TIME
.
P ,
3. Press and to the flash time you want. (8
options are available:
700MS
and )
P
4. Press to save.
13.3

Set the Area Code

P ,
1. Press and to select
P ,
2. Press and to select
P
3. Press and enter the area code.
P
4. Press to save.
13.4

Reset All Settings

All personalized settings will be reset to default.
Phonebook entries, calls list and redial list will remain
unchanged.
P ,
1. Press and to select
P ,
2. Press and to select
P
YES
3. Press to select
P
4. Press to reset all settings to default.
90 100 110 250 300 400 600
, , , , , ,
SETUP BS
.
AREA CODE
.
RESET SETTINGS
.
ALL SETTINGS
.
.
Advanced Settings