Base Settings; Base Ringer Volume; Base Ringer Melody; Change Base Pin Code - Motorola C6 Instructions Manual

6.

Base settings

6.1

Base ringer volume

Choose from 5 volume levels or Off.
m
1. Press , scroll
m
2. Press .
d
u
to select the volume (1 - 5 or OFF).
3. Press or
m
4. Press to confirm or
6.2

Base ringer melody

Choose from 5 different base ringer melodies.
You will hear a sample ring as you scroll to each ringer melody.
m
1. Press , scroll
d
BASE MELODY
2. Scroll to
d
u
3. Press or to select the ringer melody (1 - 5).
m
4. Press to confirm or
6.3

Change base PIN code

Some functions are protected by a 4 digit PIN code which must be entered if you
want to change the settings. The default PIN is 0000. You can change this to your
own preferred number.
When you enter a PIN, the digits are shown as ****.
m
1. Press , scroll
d
PIN CODE
2. Scroll to
3. Enter the 4 digit PIN code (default = 0000) and press
4. Enter the new PIN and press
5. Re-enter the new PIN and press
Important
If you change the PIN code, please keep a record of the new number.
6.4

Dial mode

Your C6 is set to tone dialling. You should only need to change this if connected
to an older type of switchboard / PBX which requires pulse dialling.
m
1. Press , scroll
d
DIAL MODE
2. Scroll to
d
u
3. Press or to select
24
d
to SETUP and press
n
to return to the previous menu.
d
to SETUP and press
and press
n
to return to the previous menu.
d
to SETUP and press
m
and press
m
to confirm.
m
d
to SETUP and press
m
and press
TONE DIAL or
m
. The display shows
m
.
m
.
m
.
.
to confirm.
m
.
.
PULSE DIAL and press
BASE VOLUME.
m
.
m
to confirm.
Base settings