Fuse And Relay Recommendations - GEM e2 2018 Owner's Manual

blown fuse, then replace the fuse. If you suspect a relay or diode needs
replacement, your authorized GEM dealer can assist.
Open the hood to access the fuse box
cover for the function and amp rating of each fuse.
Before servicing the vehicle's electrical system, always disconnect the main
power connector first, then disconnect any electrical accessory connections,
then disconnect the negative cable from the 12-volt battery (if equipped), then
disconnect the negative terminal from the main battery pack. See page 32.

FUSE AND RELAY RECOMMENDATIONS

APPLICATION
Drive; Constant;
Internal Lighting
Horn; Display
Wiper; ACC; Lights
VCM
Chassis
APPLICATION
Lithium-ion
Beacon Light
Security Light
Stereo
EPS
q
. See the label attached to the fuse box
WARNING
STANDARD 12V FUSES
SIZE
5 amp
10 amp
15 amp
20 amp
30 amp
OPTIONAL 12V FUSES
SIZE
5 amp
7.5 amp
7.5 amp
10 amp
30 amp
MAINTENANCE
LOCATION
12V Fuse Center
12V Fuse Center
12V Fuse Center
12V Fuse Center
12V Fuse Center
LOCATION
Lithium-ion Harness
Beacon Harness
Security Light Harness
Stereo Harness
EPS Harness
61