MAINTENANCE
After opening a bottle of brake fluid, always discard any unused portion. Never
store or use a partial bottle. Brake fluid is hygroscopic, meaning it rapidly
absorbs moisture from the air. The moisture causes the boiling temperature of
the brake fluid to drop, which can lead to early brake fade and the possibility of
Brake fluid may cause damage to painted and finished surfaces. Use caution
UPPER DASH REMOVAL/INSTALLATION
Some maintenance procedures require removal of the upper dash to access
components.
1. Remove the eight (8) plastic push
q
rivets
securing the dash to the
frame. Two of the rivets are located
inside the glove box.
2. Slightly raise the dash and unplug
any switch connections located
between the cup holders.
3. Carefully remove the dash from the
vehicle.
4. Reverse this procedure to reinstall
the dash
FUSES AND RELAYS
If you experience electrical failures not related to the batteries, a fuse may need
replacement. Locate and correct any short circuits that may have caused the
60
WARNING
accident or severe injury.
NOTICE
when refilling the brake fluid reservoir.