Bowl Unit; Wand - Toto NEOREST TCF996RWG/RWSW Instruction Manual

Maintenance

Bowl unit

• Toilet brush
• Neutral toilet detergent
Unplug the power plug.
(Page 15)
1
Switch the breaker on the distribution board to OFF.
Clean with a toilet brush or a similar tool.
2
■ If the bowl unit is clogged
• Using a manual pump or the like, provide 10 cm or more clearance between the top of the bowl unit and the
water surface.
Use commercially available tools that are made for unclogging the toilet bowl.
(May cause overfl ow of dirty water and water damage.)
Vinyl sheet, etc.
10cm or more
■ If the fl oor is dirty
• Clean it with a well wrung cloth. (Not cleaning the fl oor may cause stains or corrosion.)
• Using the product while standing may cause splashing. To reduce splashing, use the product while seated.
Insert the power plug.
(Page 15)
3
Switch the breaker on the distribution board to ON.
Bowl Unit
● To preserve the performance of the photocatalyst cleaning, clean the toilet bowl surface with a toilet brush,
etc. using commercially available hydrochloric acid-based or inorganic acid-based detergent.
*1 Other than the TCF994
32
Bowl unit
(Perform daily)
• Strongly acidic cleaners or strong
alkaline cleaners
• Cleaners containing abrasive
compounds
• Fluoride-based detergent (containing
hydrogen fl uoride or ammonium
fl uoride)
• Wire brush
• Abrasive nylon scrubbing brush
(UK)
(UK)
*1
(Approximately once a month)

Wand

Deodorizing fi lter
Wand
(Perform monthly)
<Wand cleaning> If you notice dirt
Soft cloth Toilet paper, etc.
(May cause damage.)
Extend the wand.
1
• Operate with the buttons on the back side
of the remote control.
(1)
Press [MENU].
Use to select
(2)
[MANUAL CLEANING].
●
Press [ ENTER].
Use to select
(3) [WAND CLEANING ON/
OFF].
●
Press [ ENTER].
• The wand extends and water sprays out for
cleaning.
• The wand automatically retracts after about
5 minutes.
Wipe with a soft, wet cloth.
2
• Do not pull, push or press the wand with
excessive force.
(May cause damage or malfunction.)
Press [STOP] on
3
the front side of the
remote control.
• The wand retracts.
Deodorizing fi lter
(Perform monthly)
<If you notice odors>
Unplug the power plug.
(Page 15)
1
Switch the breaker on the
distribution board to OFF. (UK)
Remove the deodorizing fi lter.
2
• Use the notch of the deodorizing fi lter to pull
it out.
• Do not pull with undue force. (May cause
damage or malfunctions)
Notch
Deodorizing filter
Clean with a tool such as a
3
toothbrush.
• When washing with water, dry off all water
before mounting.
Toothbrush
Mount the deodorizing fi lter.
4
• Push fi rmly until a click sound is heard.
Insert the power plug.
(Page 15)
5
Switch the breaker on the
distribution board to ON.
(UK)
Wand
Deodorizing filter
33