Motorola iDEN i365 User Manual page 208

4. Under Manufacturer, select
For Model, choose
click Next to continue.
5.
Select the COM port you want your phone installed
on, and click
Next
installation.
Creating a Dial-up Connection
In order to connect to the Internet or a Network using
your phone, you must set up a dial-up connection.
1.
From the Control Panel select
, and then select
Connections
2.
Under Network Tasks, select
. When the New Connection Wizard
Connection
appears, click on
Note To get to New Connections in Classic View, from the
Control Panel select Network Connections , and click
on New Connection Wizard .
3.
Select
Connect to the Internet
4.
Select
Set up my connection manually
196 Section 3B. Data Services
[Standard Modem Types]
Standard 19200 bps Modem
and then to complete the
Finish
Network and Internet
Network Connections
Create a New
to continue.
Next
and click
Next
and click
. 5. From the Internet Connection screen, select
, and Connect Using a Dial-up Modem
Important
6.
Name the dial-up connection and click
Tip
7.
Enter a number for circuit data dial-up that will
.
connect you to you local ISP provider.
– or –
If you plan on connecting via packet data, enter
S = 2, and click
Important
.
.
Next
You may be prompted to select the modem
you would like to use. Make sure you choose
the Standard 19200 bps modem you created
earlier.
It might be helpful to give this dial-up connection a
name that will remind you it is a modem connection
for your phone.
.
Next
Circuit Data users must be provisioned for
Circuit Data by their carrier. Please contact
your ISP to obtain a local dial-in number.
Packet Data users must be provisioned for
Packet Data by their carrier.
and click Next .
Next .