Page 1: User Guide
User Guide ® i365 by Motorola www.nextel.com © 2008 Sprint. Sprint and the NEXTEL name and logo are trademarks of Sprint. Other marks are the property of their respective owners. 8/26/08...
Page 2 Motorola reserves the right to change or modify any information or specifications without notice or obligation.
Page 3: Fcc Notice To Users
FCC ID in the format FCC-ID:xxxxxx on the product label. Motorola has not approved any changes or modifications to this device by the user. Any changes or modifications could void the user’s authority to operate the equipment. See 47 CFR Sec.
Page 4: Table Of Contents
Table of Contents Introduction ....... i Your Phone’s Menu......ii Use and Care .
Page 5 Phone Setup Options ..... . 81 2C. Security ......85 SIM Card Security .
Page 6 Smart Practices While Driving ....212 4B. Manufacturer’s Warranty ... . . 214 Motorola Limited Warranty for the United States and Canada ..214 .
Page 7: Introduction
Introduction This introduces you to your wireless service User Guide and all the features of your new phone. It’s divided into four sections: Section 1: Getting Started Section 2: Using Your Phone Section 3: Service Features Section 4: Safety and Warranty Information Throughout this guide, you’ll find tips that highlight special shortcuts and timely reminders to help you make the most of your new phone and service.
Page 8: Your Phone's Menu
Your Phone’s Menu The following table outlines your phone’s menu structure. For more information about using your phone’s menus, see “Navigating Through Phone Menus and Options” on page 17. Java Apps Settings 1: Display/Info 1: Wallpaper 1: Buy Wallpapers 2: Placement 3: Wallpaper 4: Autocycle 2: Text Size...
Page 9 10: DTMF Dialing 11: Prepend 3: DC/GC Options 1: Tkgrp Silent 2: Tkgrp Area 3: One Touch DC 4: Alert Type 5: On/Off Settings 6: Store Rcvd Info 4: Personalize 1: Menu Options 1: Reorder Menu 2: Add/Remove Apps 2: Up Key 3: Down Key 4: Left Key 5: Right Key...
Page 10 Ring Tones 1: Buy Ring Tones 2: Vibrate All 3: < List of Ringtones on Your Phone > 4: Vibrate 5: Silent Contacts Messages 1: [Create Mesg] 2: Voice Mail 3: Inbox 4: Drafts 5: Sent Items 6: Net Alert 7: SMS Call Forward Downloads...
Page 11 2: Privacy 3: Interface Datebook Memo Call Timers 1: Last Call 2: Phone Reset 3: Phone Lifetime 4: DC/GC Reset 5: DC/GC Lifetime 6: Circuit Reset 7: Circuit Lifetime 8: Kbytes Reset Recent Calls Shortcuts Profiles 1: [New Profile] 2: Surveillance 3: Standard 4: Car 5: Meeting...
Page 12: Use And Care
Use and Care To care for your Motorola phone, keep it away from: liquids of any kind Don’t expose your phone to water, rain, extreme humidity, sweat, or other moisture. extreme heat or cold Avoid temperatures below -10°C/14°F or above 45°C/113°F.
Page 13: Section 1: Getting Started
Section 1 Getting Started...
Page 14: Setting Up Service
Section 1A Setting Up Service Setting Up Your Phone (page 2) Activating Your Phone (page 3) Setting Up Your Voicemail (page 3) Enabling Security (page 4) Account Passwords (page 4) Getting Help (page 5) Setting up service on your new phone is quick and easy. section walks you through the necessary steps to unlock your phone, set up your voicemail, establish passwords, and contact Nextel for assistance with your...
Page 15: Activating Your Phone
Note Your phone’s battery should have enough charge for your phone to turn on and find a signal, set up your voicemail, and make a call. You should fully charge your battery as soon as possible. See “Charging the Battery” on page 12 for details. Activating Your Phone If you purchased your phone at a Nextel Store, it is probably activated and ready to use.
Page 16: Enabling Security
Enabling Security You must enable security the first time you power on your phone or within ten days of first activation of your phone. To enable security: Press W to power on your phone. - (right softkey). Press You are prompted to enable security. Press (right softkey).
Page 17: Getting Help
Voicemail Password You’ll create your voicemail password (or passcode) when you set up your voicemail. See “Setting Up Your Voicemail” on page 3 for more information on your voicemail password. Getting Help Managing Your Account Online: www.nextel.com Access your account information. Check your minutes used (depending on your service plan).
Page 18: Phone Basics
Section 1B Phone Basics Your Phone (page 6) Getting Started With Your Phone (page 8) Features of Your Phone (page 15) Navigating Through Phone Menus and Options (page 17) Displaying Your Phone Number and Direct Connect Number (page 19) Entering Text (page 20) Accessories (page 24) Your phone is packed with features that simplify your life and expand your ability to stay connected to the people and...
Page 19: Key Functions
Key Functions Speaker Button lets you place or receive calls in speakerphone mode. allows you to adjust the ringer Volume Button volume in standby mode or adjust the voice volume during a call. The volume key can also be used to scroll up or down to navigate through the different menu options.
Page 20: Getting Started With Your Phone
Headset Jack allows you to plug in either a stereo headset (included) or an optional headset for convenient, hands-free conversations. WARNING Inserting an accessory into the incorrect jack may damage the phone. provides information about your Display Screen phone’s status and options. allows you to access special functions.
Page 21 Removing and Inserting the SIM Card Important To avoid losing information stored in your SIM card, do not remove it from your phone unless absolutely necessary. To remove your SIM card: With your phone powered off, remove the battery door and battery. See “Removing the Battery” on page 11.
Page 22: Battery Capacity
Nextel-approved and Motorola -approved batteries and accessories can be found at Sprint Stores or through Motorola. You may order online at calling1-866-866-7509.
Page 23 Remove the battery cover from the back of the phone Insert the battery into the opening, making sure the connectors align. Gently press down to secure the battery. Replace the battery cover and press down until you hear a click. Turn the release tab clockwise to lock.
Page 24 For a quick check of your battery level, glance at the battery charge indicator located on your display screen. Always use a Nextel-approved or Motorola-approved desktop charger, travel charger, or vehicle power adapter to charge your battery.
Page 25 Battery Unable to Charge following steps: • Remove the battery and inspect it to confirm that it bears a Motorola “Original Equipment” hologram; • If there is no hologram, the battery is not a qualified battery; • If there is a hologram, replace the battery and retry charging it;...
Page 26: Turning Your Phone On And Off
Avoid dropping the battery or mobile device, especially on a hard surface. If your battery or mobile device has been subjected to such damage, take it to a Motorola Authorized Service Center before using. Do not attempt to dry it with an appliance or heat source, such as a hair dryer or microwave oven.
Page 27: Features Of Your Phone
Features of Your Phone The i365 is durable, easy to use, and reliable, and it offers many features and service options. This list previews some of those features and provides page numbers where you can find out more: provides instant, coast-to-coast Nextel Direct Connect 2-way “walkie-talkie-style”...
Page 28 — A fuller battery indicates a Battery Strength greater charge. — More bars next to the Signal Strength antenna indicate a stronger signal. — Your phone is without service. No Service You cannot make or receive any type of call. Phone In Use —...
Page 29: Navigating Through Phone Menus
— You are using one of the phone’s Text Input text entry methods. See “Selecting a Text Input Mode” on page 20. Internet — You are ready to browse the Internet or are browsing the Internet using a secure connection. See “Data Services” on page 191.
Page 30 When scrolling through the main menu, it may be necessary to select More to view additional main menu options. Depending on which menu view you’re using, either highlight More and press r or press More - (right softkey). Selecting Menu Items As you navigate through the menu, menu options are highlighted.
Page 31: Displaying Your Phone Number And Direct Connect Number
read the text for a quick overview of the feature. For more information, refer to this guide. Displaying Your Phone Number and Direct Connect Number lets you view your phone number, Direct My Info Connect number, and other phone information. To view information about your phone: Press M >...
Page 32: Entering Text
Editing My Info You can edit My Info to enter or change the text that appears in My Name Press M > My Info - (left softkey). Press Edit Select Name Enter the name you want to appear. See “Entering Text”...
Page 33 to enter preset messages. [You Insert QuickNotes can also access Quick Notes by pressing - (left softkey) when beginning a QNotes message. (See page 23).] When entering text, press the * (Shift) key to change letter capitalization (ABC > Abc > abc). Entering Text Using Word Text Input Word Text Input (T9) lets you enter text by pressing keys just once per letter.
Page 34 Entering Text Using Alpha Mode Select the mode. (See “Selecting a Text Input Alpha Mode” on page 20.) Press the corresponding keys repeatedly until the correct letter appears. (For example, to enter the word “Bill,” press 2 twice, 4 three times, 5 three times, and 5 three times again.) (If you make a mistake, press erase a single character.
Page 35: Special Function Keys
Entering Numbers, Symbols, and Quick Notes To enter numbers: Select the mode and press the appropriate Numeric key. (See “Selecting a Text Input Mode” on page 20.) To enter symbols: Select the Symbols mode. (See “Selecting a Text Input Mode” on page 20.) To enter a symbol, press the appropriate key indicated on the display.
Page 36: Accessories
These icons appear: Shift is on. Caps lock is on. When none of these icons appear, letters typed are lowercase. Scrolling up after typing a letter makes that letter uppercase. When creating a text message, you may not be able Note to make a letter uppercase by scrolling up, depending on the type of text message and the text...
Page 37 Using a Remote Direct Connect Button If you are using a headset or other optional accessory with a remote Direct Connect button, you can use the remote Direct Connect button for phone calls, Direct Connect calls, and Group Connect calls. For phone calls, use the remote Direct Connect button to answer calls, switch between calls, and end calls.
Page 39: Section 2: Using Your Phone
Section 2 Using Your Phone...
Page 40: Making And Answering Calls
Section 2A Making and Answering Calls Types of Calls (page 28) Making and Answering Phone Calls (page 29) Making and Answering Direct Connect Calls (page 36) Making and Answering Group Connect Calls (page 39) Nextel Direct Send (page 44) Making and Answering Talkgroup Calls (page 51) Making and Answering Direct Talk Calls (page 53) Call Alerts (page 57) Your i365 phone offers many different ways to connect to your...
Page 41: Making And Answering Phone Calls
allow two-way radio calling to up to Talkgroup Calls 100 Nextel Talkgroup customers simultaneously (page 51). Note To learn more about the differences between Nextel Group Connect calls and Talkgroup calls, please see “Difference Between Group Connect and Talkgroup Calls” on page 51. Nextel Direct Talk allows for two-way radio communication “off the network”...
Page 42: Calling Emergency Numbers
If the incoming call is from a number stored in your Contacts, the entry’s name is displayed. The caller’s phone number may also be displayed, if available. Note When your phone is off, calls go directly to voicemail. Ending a Call To end a call press o.
Page 43: In-Call Options
emergency response center when you make an emergency call. Important Always report your location to the 911 operator when placing an emergency call. Some designated emergency call takers, known as Public Safety Answering Points (PSAPs) may not be equipped to receive GPS location information from your phone.
Page 44: End-Of-Call Options
Contacts to display your Contacts list. to display Recent Calls list. Recent Calls to display your phone’s Information. My Info to display the phone’s electronic notepad. Memo to enter a datebook event. Datebook to create a message. Messages to record the phone call. Record to enter the GPS application.
Page 45: Saving A Phone Number
Saving a Phone Number Your phone can store up to 12 phone numbers in each of 600 Contacts entries. Each entry’s name can contain 20 characters. Your phone automatically sorts the Contacts entries alphabetically. (For more information, see “Contacts” on page 99.) Enter a phone number and press M.
Page 46: Dialing From The Contacts List
To dial or save phone numbers with pauses: Enter the phone number. Press and hold * until the letter represents a three-second pause. If you want a pause longer than three seconds, press and hold * more than once. Each second pause.
Page 47: Using Speed Dialing
in Contacts, you can make a call to any of the numbers stored with it. If you scroll to contact information from another phone, you can make a call to any of the numbers in the contact information. To place the call now, press O. –...
Page 48: Making And Answering Direct Connect Calls
To use speed dial for locations 10–600: Enter a speed dial number and then press #. Press O to dial the number. Making and Answering Direct Connect Calls Nextel offers the following Direct Connect services: allows coast-to-coast Direct Nationwide Direct Connect Connect calling to Nextel subscribers to and from anywhere on the Nextel National Network (U.S.).
Page 49 An asterisk separates each part (for example: 999*999*9999). When you enter a number containing all three parts, you must separate them with asterisks. Note The number of digits in each part of a Direct Connect number may vary. For example, your Direct Connect number may be formatted as 999*999*9999, while another valid number may appear as 555*555555*55.
Page 50: Answering Direct Connect Calls
Making Direct Connect Calls From Recent Calls If you have numbers stored in the Recent Calls list, you can use these numbers to make calls. For information on the Recent Calls list, see “Recent Calls” on page 93. Press M >...
Page 51: Making And Answering Group Connect Calls
A Direct Connect call ends automatically after there is no activity on the call for several seconds. Making and Answering Group Connect Calls A Group Connect call is similar to a Direct Connect call to one user, but is made to multiple Direct Connect subscribers at once.
Page 52: Adding Group Members
Answering Group Connect Calls Proceed as if answering a Direct Connect call from one user. Only one person at a time may speak on a Group Connect call. Creating Groups in Contacts Press M > Contacts Select [New Group] If you want to assign a name to the Group, enter the name.
Page 53 Calls list, or Memo, press M. A checkmark appears next to each selected member. Note To deselect a member, scroll to a selected member and press r. - (left softkey) and then press Press Done (left softkey) to save the group. To add Group members manually from the keypad: While creating a Group, select Enter the Direct Connect number using the...
Page 54 Removing Members or Groups To remove a member from a Group: From Contacts, scroll to the Group you want to delete the member from. - (left softkey). Press Edit Scroll to the member you want to remove. Press M. Select Remove Member - (left softkey).
Page 55: Group Connect Call Information
Note You cannot record a voice name during an active call. - (left softkey). Press Save Storing Members of Groups To store a member from the Recent Calls list or within Contacts: Display the Group containing the number or member you want to store. Press M.
Page 56: Nextel Direct Send
Group Connect Call Details During a Group Connect call, you can view details about the other group members, such as their name or Direct Connect number, and their status on the call. To view Group Connect call details: - (left softkey). Press Details In the Details view, these icons appear next to member...
Page 57 You cannot talk or listen on a Direct Connect call while a picture is being transmitted. Other activities, such as searching for a picture, do not prevent you from talking or listening. To send a picture during a call: While in a Direct Connect call, press softkey).
Page 58 Press the Direct Connect button to send the picture. Wait while the picture is transmitted. The Direct Connect call is temporarily interrupted while a picture is transmitted. When prompted, press the Direct Connect button to resume the Direct Connect call. Receiving a Picture When someone sends you a picture using Nextel Direct Send, your phone emits a tone or vibrates and a...
Page 59: Sending My Info And Contact Information
Setting Picture Capability To turn your phone’s ability to send and receive pictures in Direct Connect calls on or off: Press M > Settings > DC/GC Options > On/Off Settings and press r to check or uncheck Select Pictures the box. - (left softkey) to save the setting.
Page 60 A checkmark appears next to the fields that will be sent. To add or remove the checkmark, select the field. When you are finished, press To control whether your information is sent automatically: Press M > My Info Press M. Select Direct Send Setup >...
Page 61 To send contact information during a call: While in a Direct Connect call, press M. Select Contacts Scroll to the Contacts entry you want to send and do the following: If the Contacts entry you scrolled to is a Group, press M and select Send Group - (left softkey) to allow yourself to be...
Page 62 To view the information while still in the Direct Connect call: Press M. Select View Contact You can also view My Info from other phones on the Recent Calls list. See “Sending My Info and Contact Information” on page 47. Sending Groups Using Direct Send You can send a Group using Nextel Direct Send so that the person who receives the Group can use the list.
Page 63: Making And Answering Talkgroup Calls
Note If you choose to include yourself and the Group already contains 20 members, you will be prompted that the list is full. You will be excluded from the list. Select Send via PTT Use the keypad to enter the Direct Connect number you want to send the contact to.
Page 64: Adding More Talkgroups
Group Group Icons Geography Nationwide Maximum 21 (including Group Size originator) Set-up Dynamically, via your phone Voice Activated Dialing Joining a Talkgroup To participate in a Talkgroup, the account administrator must first add you to the membership and then you must “join”...
Page 65: Making And Answering Direct Talk Calls
Making Talkgroup Calls Press # and then enter the Talkgroup number using the keypad. – or – Select the Talkgroup from Contacts or the Recent Calls list Press the Direct Connect button and continue as if making a Direct Connect call. Receiving Talkgroup Calls Answer it as you would a regular Direct Connect call.
Page 66 The following features are not available while in Direct Talk mode: On-network phone calls. On-network Direct Connect, Group Connect, Talkgroup calls, and Call Alerts. Data services. Sending and receiving messages. Call timer. Sending Call Alerts. Call forwarding. Setting Your Phone to Direct Talk Before you and another caller can use Direct Talk, both of your phones must be set to Direct Talk mode.
Page 67 Select Code Select a code. - (right softkey) to return to the Direct Press Back Talk standby screen. Making and Receiving Code Calls in Direct Talk Mode To make a Code call using Direct Talk: In Direct Talk mode, press and hold the Direct Connect button.
Page 68 Receiving a Private Direct Talk Call The number or name of the person who initiated the call appears on your display screen. Answer the call in the same way you answer a regular Direct Connect call. A Private Direct Talk call ends a short time after the last party releases the Direct Connect button.
Page 69: Call Alerts
To set the code to Receive All: In Direct Talk mode, press Edit Select Code. Select Receive All - (right softkey) to return to the Direct Press Back Talk standby screen. Making Emergency Calls While in Direct Talk Mode If you attempt to make an emergency 911 call while in Direct Talk mode, your phone automatically exits Direct Talk mode and attempts to find a network signal.
Page 70: Using The Call Alert Queue
Responding to a Call Alert Note You can set a distinctive ringer for Call Alerts. See “Ring Tones” on page 65. To answer a Call Alert: Press the Direct Connect button to make a Direct Connect call to the sender. To clear a Call Alert: - (right softkey).
Page 71 Responding to Call Alerts in the Queue After you queue a Call Alert, you can respond to it by making a Direct Connect call to the sender or sending a Call Alert to the sender. To make a Direct Connect call to the sender: Press M >...
Page 72: Settings
Section 2B Settings Using the Settings Menu (page 60) Sound Settings (page 65) Display Settings (page 70) Messaging Settings (page 72) Temporarily Turning Off Transmissions (Airplane Mode) (page 74) Setting One Touch Direct Connect (page 74) Headset Options (page 76) Profiles (page 76) Phone Setup Options (page 81) You can customize your phone to sound, look, and operate just...
Page 73: Phone Calls Features
— controls whether the time and date appear in Clock standby mode; sets time and date format; sets year. Menu View — controls whether the items on your main menu and Java applications menu appear as large icons or a list. —...
Page 74 Prepend — lets you specify a prefix, such as a country code for international calls, to be automatically added to phone numbers you dial. DC/GC Options Features menu controls how your phone DC/GC Options handles Direct Connect calls, Group Direct calls, and Talkgroup calls: Tkgrp Silent —...
Page 75: Security Features
— sets the main menu item you access Left Sftkey when you press the left softkey in standby mode. Right Sftkey — sets the main menu item you access when you press the right softkey in standby mode. — sets the main menu item you see when Power Up you power on your phone.
Page 76: Advanced Features
GPS PIN — enables and disables your phone’s GPS PIN security feature. See “Setting the GPS PIN Security Feature” on page 90. — changes your phone unlock code, Change Passwds security code, SIM PIN, and GPS PIN. Advanced Features menu contains advanced Settings Advanced features.
Page 77: Sound Settings
Sound Settings Ring Tones Ringer types help you identify incoming calls and messages. You can assign ringer types to individual Contacts entries, types of calls, and types of messages. Selecting Ringer Types Your phone provides a variety of ringer options that allow you to customize your ring and volume settings.
Page 78: Vibrate Settings
Assigning a Ring Tone to a Contact You can also assign a ringer to a specific contact entry so you know who's calling without looking at the phone. Press M > Ring Tones Scroll through the list of ring tones and select the one you want to assign.
Page 79: Silence All
To deactivate Vibrate All: Press and hold the volume key up to unlock vibrate all. Press the volume key up repeatedly to select a volume level. – or – Press M > Ring Tones> Vibrate All These icons indicate how the ringer is set: The phone always vibrates instead of making a sound.
Page 80: Downloading More Ring Tones
To deactivate Silence All: Press the volume key up repeatedly to select a volume level. To set your phone to vibrate instead of making a sound for some features but not others: Press M > Ring Tones Make sure is set to Vibrate All Select from the list of ring tones.
Page 81: Deleting Custom Ring Tones
Managing Memory To view the amount of memory available for custom ring tones: Press M > Ring Tones Make sure is set to Vibrate All Highlight any ring tone and press M Memory Usage Deleting custom ring tones frees memory. Note Ring tones are stored in your phone using the same memory space used to store messages, voice...
Page 82: Display Settings
Adjusting the Phone’s Volume Settings Adjust your phone’s volume settings to suit your needs and your environment. Press M > Settings > Volume Select Line 1 Line 2 Messages Keypad Java Earpiece Java Spkr Using the navigation key, choose a volume level and press r.
Page 83: Changing The Theme
Select an image and press View - (right softkey) to return to the view it. Press Back available images. Press r to assign an image. Setting Wallpaper to Change Automatically When you set your wallpaper to change automatically, your phone uses each of the pictures in wallpaper, cycling through them at a pace you choose.
Page 84: Messaging Settings
Changing the Text Size Adjust the font when entering text (for example, when using the notepad or when adding a Contacts entry). Press M > Settings > Display/Info > Text Size Select , or Zoom Standard Compressed press r. Messaging Settings Staying connected to your friends and family has never been easier.
Page 85 and press r. Select Inbox Sent Items Choose a clean-up option. To automatically delete messages now, press r - (left softkey). or press – or – To delete messages later, press softkey). Adding a Customized Signature Add a customized signature to each message you send.
Page 86: Temporarily Turning Off Transmissions
Temporarily Turning Off Transmissions (Airplane Mode) Sometimes you may want to have your phone on, but turn off its ability to make and receive calls and other transmissions. To set your phone so that it cannot make or receive phone calls, Direct Connect calls, Group Connect calls, Talkgroup calls, or transfer data: Press M...
Page 87 and press r. Set this option to Last Call To set your phone to call a Direct Connect number you choose: Press M > Settings > DC/GC Options > One Touch DC > Assigned No Enter the Direct Connect number you want your phone to call every time you press the Direct Connect button.
Page 88: Headset Options
Headset Options To set your phone to send incoming sound to a headset only, or to a headset and a speaker at the same time: Press M > Settings > Advanced > Headset/Spkr Select to send incoming sound to the HdsetOnly headset only.
Page 89: Viewing Profiles
Viewing Profiles To view the profiles stored in your phone: Press M > Profiles Scroll to the profile you want to view. - (left softkey). Press View The profile that is currently in effect on your phone has a checkmark next to it. Scroll to view settings.
Page 90: Temporary Profiles
To set your phone to update the profile in effect to reflect any changes you make to settings: Temp Profile in step 4 above. Temporary Profiles If your phone is set to create temporary profiles, a temporary profile is created when you make changes to settings without switching or editing profiles.
Page 91: Creating Profiles
Creating Profiles Press M > Profiles Select [New Profile] – or – Scroll to any profile, press M, and then select Enter the name you want to give the profile. When you are finished, press r. If you want to base this profile on an existing profile, select Copy From and then select the profile...
Page 92: Setting Call Filtering
To delete all profiles: Press M > Profiles Press M. Select Delete All - (left softkey) to confirm. Press r or press Setting Call Filtering The call filtering setting in each profile lets you control which calls, Call Alerts, and message notifications your phone notifies you of, and which it ignores.
Page 93: Phone Setup Options
– sets filtering options for message Notifications notifications. – sets your phone to notify you of all ● messages. – sets your phone not to sound Voice Messages ● a tone or vibrate when you receive voice messages. – sets your phone not to sound Text Messages ●...
Page 94 - (left softkey). Press r or press Select Press the number key you want to assign to the shortcut and press r. If you want to record a voice name for the shortcut, select . As directed by the screen prompts, Voice say and repeat the name you want to assign to the number.
Page 95 Select Reorder Scroll to the shortcut you want to move. - (left softkey). Press Grab Scroll to the place where you want the shortcut to appear. - (left softkey). Press Insert Repeat step 4 through step 7 for all the items you want to move.
Page 96: Call Answer Mode
Call Answer Mode Select how to answer incoming calls on your phone: whether you want to be required to press O or to press any number key. Press M > Settings > Phone Calls. Select an option and press r. Press r and select Any Key Answer: incoming call to be answered by pressing any...
Page 97: Security
Section 2C Security SIM Card Security (page 85) Your Phone’s Lock Feature (page 87) Your Phone’s Keypad Lock (page 87) Resetting Your Phone (page 88) GPS Privacy Options (page 89) Java Applications & GPS Security (page 90) By using the security settings on your phone, you receive peace This section will of mind without sacrificing flexibility.
Page 98: Unblocking The Pin
Entering the PIN Turn on your phone. When the screen appears, enter your SIM PIN - (left softkey). SIM PIN and press Important If you enter your PIN incorrectly three times, your SIM card is blocked. See “Unblocking the PIN” on page 86 Changing the PIN Press M...
Page 99: Your Phone's Lock Feature
Your Phone’s Lock Feature Locking Your Phone When your phone is locked, you can only make calls to 911. To lock and unlock your phone, you must enter your phone’s four-digit lock code. If you do not know your phone’s lock code, try 0000; if this does not work contact Nextel Customer Service for assistance.
Page 100: Resetting Your Phone
To lock the keypad: From standby mode, press M. Press *. If you press a key while the keypad is locked, instructions for unlocking the keypad display briefly. To unlock the keypad: From standby mode, press M. Press *. To automatically lock the keypad if there has been no activity for a specified time.
Page 101: Gps Privacy Options
Read the prompt and press complete the reset. (Press cancel.) Resetting All Selecting resets phone settings and clears all Reset All phone data, including Contacts History, Scheduler, and Messaging. Press M > Settings > Advanced > Reset Defaults > Reset All Enter your security code and press softkey).
Page 102: Java Applications & Gps Security
Ask Access — When an application attempts to view the location of your phone, you will be prompted to give permission. However, location information may still be available to the phone’s owner, fleet manager, or account administrator. Setting the GPS PIN Security Feature To prevent your GPS privacy settings from being altered without your knowledge, your GPS privacy option can be protected by a PIN.
Page 103 Setting Privacy for All Java Applications These options control the privacy of all Java applications on your phone: — No Java or similar software applications Restricted may access the location of your phone. However, location information may still be available to the phone’s owner, fleet manager, or account administrator.
Page 104 To grant this request: - (left softkey). The application Press Grant accesses your phone’s location. Select the granting option you want: — If the application requests access to the Always location of your phone again, the request is granted without notifying you. —...
Page 105: Recent Calls
Section 2D Recent Calls About Recent Calls (page 93) Viewing Recent Calls (page 96) Recent Call Options (page 96) Making a Call From Recent Calls (page 97) Saving Items From Recent Calls (page 97) Deleting Items From Recent Calls (page 98) Prepending a Phone Number From Recent Calls (page 98) The Recent Calls list keeps track of incoming calls, outgoing calls, and missed calls.
Page 106: Calls And Call Alerts
When you select a call to view its details, you see information such as the name associated with the call, the number, date, time, and duration of the call. Note The Recent Calls list records only calls that occur while the phone is turned on. If a call is received while your phone is turned off, it will not be included in the phone’s Recent Calls list.
Page 107: Contact Information From Other Phones
This icon j appears with My Info sent from other phones on the Recent Calls list, along with the Direct Connect number of the person who sent the information. When you select My Info from other phones to view its details, you see all the information sent.
Page 108: Viewing Recent Calls
Viewing Recent Calls Note The Recent Calls list records only calls that occur while the phone is turned on. If a call is received while your phone is turned off, it will not be included in the phone’s Recent Calls list. If you return a call from the voicemail menu, it will not be included in your phone’s Recent Calls list.
Page 109: Making A Call From Recent Calls
Making a Call From Recent Calls Press M > Recent Calls Select an entry and press O. – or – Press the Direct Connect button to make a Direct Connect or Group Connect call. Note You cannot make calls from Recent Calls to entries identified as No ID or Restricted.
Page 110: Deleting Items From Recent Calls
Deleting Items From Recent Calls To delete an item from the Recent Calls list: From the Recent Calls list, scroll to or select the item you want to delete. Press M and select Delete - (left softkey) to confirm. Press or r press To delete all items on the Recent calls list: Press M >...
Page 111: Contacts
Section 2E Contacts About Contacts (page 99) Creating Contact Entries (page 100) Viewing Contacts (page 103) Adding a Number or Address to an Entry (page 104) Editing Entries (page 105) Deleting Entries (page 105) Assigning Speed Dial Numbers (page 106) Selecting a Ringer Type for an Entry (page 107) Checking Capacity (page 107) Dialing Nextel Customer Service (page 107)
Page 112: Creating Contact Entries
Types of Contacts Each number or address stored must be assigned a Contacts type: Mobile phone number Direct Connect number Work1 phone number Work2 phone number Home phone number Email email address phone number Pager phone number Talkgroup Talkgroup number Scangroup Group Group...
Page 113 To cancel a Contacts entry at any time press - (left softkey) to (right softkey) and then press return to the Contacts list or press o to return to standby mode. To create a Contacts entry: Press M > Contacts > [New Contact] –...
Page 114: Creating Pauses And Waits
If you want to assign more options to the number, including Speed # Voice Name and proceed to steps 7-9. Otherwise, skip to step 10. The default Speed Dial number assigned to a phone number is displayed in the This is always the next available Speed Dial location.
Page 115: Viewing Contacts
Storing Numbers Faster To store numbers to Contacts from standby mode: Use the keypad to enter the number you want to store. Press M. Select Store Number To store the number as a new entry, select [New Contact] – or – To store the number to an existing entry, select the entry.
Page 116: Adding A Number Or Address To An Entry
Showing Only Direct Connect Numbers, Groups, and Talkgroups To set Contacts to show only entries that contain Direct Connect numbers, Groups, and Talkgroups: Press M , and then press M. > Contacts Select Filter Set this option to DC/GC/Scngrp To set Contacts to show all entries: Press M , and then press M.
Page 117: Editing Entries
Editing Entries Press M > Contacts and scroll to the entry you want to edit. - (left softkey). Press Edit – or – is not one of your options, press M and then Edit select Edit The entry details screen displays. Follow the applicable instructions in “Creating Contact Entries”...
Page 118: Assigning Speed Dial Numbers
Assigning Speed Dial Numbers Your phone can store up to 600 phone numbers in speed dial locations. (For details on how to make calls using speed dial numbers, see “Using Speed Dialing” on page 35.) You can assign speed dial numbers when you add a new Contacts entry, when you add a new phone number to an existing entry, or when you edit an existing number.
Page 119: Selecting A Ringer Type For An Entry
Selecting a Ringer Type for an Entry Assign a ringer type to a Contacts entry so you can identify the caller by the ringer type. (See “Ring Tones” on page 65.) Press M , scroll to an entry, and then >...
Page 120: Tools
Section 2F Tools Datebook (page 108) Java Applications (page 116) Digital Rights Management (DRM) (page 120) GPS Enabled (page 122) Memo Feature (page 129) Voice Records (page 131) My Pictures (page 133) Call Timers (page 135) Your phone is equipped with several personal information management features that help you manage your busy lifestyle.
Page 121: Viewing Datebook
A date — The date automatically assigned to an event is the date that was highlighted or selected when you began creating the event. You can change this date before storing the event. A repeat — Lets you store the event as a recurring event.
Page 122: Creating Events
To highlight a day in month view: Enter the date using the keypad. To go to today’s date: While viewing Datebook, press M. Select Go To Today To go to any date in Datebook: While viewing Datebook, press M. Select Go To Date Select the date you want.
Page 123 If you want to assign a location to the event, select and: Location Enter the location. – or – Enter a phone number, Direct Connect number, or Talkgroup number. After the event is stored, you can call this number. When you are finished, press r. The start time automatically assigned to an event is the beginning of the day.
Page 124: Editing Events
Note If an event has no start time, you cannot create a reminder for it. If you have created a reminder for the event and want to set the ring tone for that reminder: Select Ring Tone Select the ring tone you want from the ring tones stored in your phone.
Page 125: Receiving Reminders
Select Copy - (left softkey) to confirm. Press Enter the date you want. Press r. If you want to change more information, follow the applicable instructions in “Creating Events” on page 110 to edit the various fields. - (left softkey) to store the event. Press Done Deleting Events...
Page 126 Making Calls From Datebook and Datebook Reminders If you stored a phone number, Direct Connect number, or Talkgroup number in the Subject Datebook event, you can call or send a Call Alert to that number from Datebook or from the reminder of that event.
Page 127: Customizing Datebook Setup
Making Calls From Datebook Reminders To call a number: Press O. – or – Press M and then select Call # in Event To make Direct Connect calls or Talkgroup calls: Press the Direct Connect button. To send a Call Alert: Press M and select Alert # in Event Customizing Datebook Setup...
Page 128: Java Applications
Java Applications Installing Applications Press M > Java Apps Select the application or suite of applications you want to install. Installation messages appear as the application installs. If you want to create a shortcut to the Java application on the main menu, press - (left softkey), and then softkey), press press r.
Page 129: Resuming Applications
You can have up to three applications running at one time — one running in the foreground and two in the background. Resuming Applications You can resume a suspended application at any time. This brings it to the foreground. To resume a suspended application: Press M and select >...
Page 130: Deleting Applications
To access a catalog of items available for purchase and download: Press M Java Apps > Buy Games&Apps Apps. – or – Press M > Downloads. You can also go to www.nextel.com, account, and click the Digital Media selection of available Java applications and downloading instructions.
Page 131: Shortcuts On The Main Menu
Note Java application data is stored in your phone using the same memory space used to store messages, voice records, pictures, ring tones, and wallpaper images. Deleting some of these other items frees memory for Java applications. Shortcuts on the Main Menu When you install an application, you can create a shortcut to the application on the main menu.
Page 132: Digital Rights Management (Drm)
Digital Rights Management (DRM) When you download multimedia content available online, such as Java applications, these items may be subject to DRM restrictions. DRM, or digital rights management, is a system that defines how copyrighted multimedia content can be distributed and used. DRM limits items to time-based or count-based usage settings.
Page 133: Deleting Items
Renewing DRM Licenses Note Java application data is stored in your phone using the same memory space used to store messages, voice records, pictures, ring tones, and wallpaper images. Deleting some of these other items frees memory for Java applications. Go to the location on your phone that contains the item you want.
Page 134: Gps Enabled
GPS Enabled Your phone’s GPS Enabled feature uses information from Global Positioning System (GPS) satellites orbiting the Earth to determine the approximate geographical location of your phone, expressed as latitude and longitude. The availability and accuracy of this location information (and the amount of time that it takes to calculate it) will vary depending on the environment in which you are using the GPS feature.
Page 135: Making An Emergency Call
In temperature extremes outside the operating limits of your phone. Walking or driving very slowly may also substantially reduce GPS performance. Even where location information can be calculated in such situations, it may take much longer to do so, and your location estimate may not be as accurate.
Page 136: Viewing Your Approximate Location
calculate your approximate location. It will take the GPS feature of your phone some time to determine your approximate location. Even where your phone has good access to sufficient GPS satellite signals and network assist data, it may take 30 seconds or more to determine the approximate location.
Page 137: Enhancing Gps Performance
The estimated accuracy of the calculated location. This estimate of accuracy is only a very rough estimate and may vary substantially from the actual accuracy of the approximate location information reported. The number of satellites used to calculate the location. In general, more satellites make for better accuracy.
Page 138: Updating Satellite Almanac Data
To improve accuracy and increase your chances of a successful calculation, do the following while your phone is determining your approximate location: The GPS feature works best where Stay in the open. there is nothing between your phone and a large amount of open sky.
Page 139: Using Gps With Map Software
The almanac contains information about the location of satellites, their operational status, and other satellite information. Keeping this information updated enhances the performance of your GPS feature. In most cases, your phone will be able to get a fix in strong satellite signal conditions with outdated almanac data, but it may take longer.
Page 140 Software Compatibility Your phone sends location information to your laptop or other device using the standard National Marine Electronics Association (NMEA) format. Your phone supports output messages in NMEA-0183 format and supports the following NMEA-0183 sentences: GGA, GLL, GSA, GSV, RMC, and VTG. The map software running on your laptop or other device must support NMEA 3.0.
Page 141: Memo Feature
Insert the data plug into the COM port of your laptop or other device. Make sure no other application is using the COM port selected. Make sure the COM port settings of your laptop or other device are set to the following: Bits per second: 4800 Data bits: 8 Parity: None...
Page 142 To edit the memo: Press M > Memo - (left softkey) to delete the Press and hold Delete number. Enter the new number. Press r. To make a call to the memo number: Press M > Memo To make a phone call, press O. –...
Page 143: Voice Records
Voice Records A voice record is a recording you make with your phone and can play back. You can record notes to yourself or phone calls. Your phone can store up to 20 voice records. Creating Voice Records To record a note to yourself: Press M >...
Page 144: Labeling Voice Records
Labeling Voice Records When you create a voice record, it is labeled with the time and date it was recorded. You can then rename it with a custom label. Press M > VoiceRecord Scroll to the voice record you want to label. - (left softkey).
Page 145: My Pictures
Managing Memory To view the amount of memory available for voice records: Press M > VoiceRecord With highlighted, press [New VoiceRec] (left softkey). – or – With any voice record highlighted, press M, and then select Memory To free more memory by deleting all unlocked voice records: From the voice records memory screen, press - (left softkey).
Page 146: Getting File Information
Getting File Information To view the file type and file size of a picture: Scroll to or select the picture. Press M. Select Details Deleting Pictures Scroll to or select the picture you want to delete. Press M. Select Delete Section 2F.
Page 147: Call Timers
Call Timers Call timers measure the duration of your phone calls, Direct Connect, or Group Connect calls, and circuit data use, as well as the number of kilobytes sent and received by your phone: — displays the duration of your most recent Last Call phone call.
Page 148: Bluetooth
Section 2G Bluetooth Turning Bluetooth On and Off (page 136) Using the Bluetooth Menu (page 137) Pairing Bluetooth Devices (page 138) Transferring Items Via Bluetooth (page 144) Your phone features built-in Bluetooth technology, allowing you to share information more easily than ever before. a short-range communications technology that allows you to connect wirelessly to a number of Bluetooth devices, such as headsets and hands-free car kits, and...
Page 149: Using The Bluetooth Menu
Bluetooth Status Indicators The following icons show your Bluetooth connection status at a glance: No Icon – Bluetooth is disabled (default status) – Phone is in discovery mode. Blinking Icon B – Bluetooth is active. Using the Bluetooth Menu menu allows you to set up many of the Bluetooth characteristics of your phone’s Bluetooth service, including:...
Page 150: Pairing Bluetooth Devices
Pairing Bluetooth Devices Paired Devices The Bluetooth pairing process allows you to establish trusted connections between your phone and another Bluetooth device. When devices are paired, a passkey is shared between devices, allowing for fast, secure connections while bypassing the discovery and authentication process.
Page 151: Setting Your Phone For Bluetooth
Renaming Your Phone Bluetooth devices are listed by their Bluetooth addresses unless you name them. Your i365 phone comes with a default device name of “Motorola Phone.” it is recommended you rename your i365 phone with a unique device name.
Page 152: Accessing Bluetooth
Accessing Bluetooth Press M > Bluetooth. – or – While in a call, press M and select Note If Bluetooth power is set to Off on your phone, you will be prompted to temporarily turn power on in order to use Bluetooth. Making a Bluetooth Connection The following sections cover how to connect your phone to another Bluetooth device.
Page 153 To stop the search and return to the previous - (right softkey). screen, press Cancel Bluetooth Bonds (Pairing) A bond is an encryption key that is generated when two Bluetooth devices exchange a common PIN. This key verifies the identity of each device, and encrypts any data transferred between the devices.
Page 154 If you want to create a bond to have it available for future use, select Link to Devices Select the device you want. - (left softkey) if you are prompted to Press do so. Enter a PIN if you are prompted to do so, and then - (left softkey).
Page 155: Setting Device Details
To use Bluetooth during a call: While in a call, press M and then select Use Bluetooth Select the device you want to connect to. Disconnecting From a Device Press M > Bluetooth > Hands Free - (left softkey) Press Drop - (left softkey).
Page 156: Transferring Items Via Bluetooth
- (left softkey) to delete the Press and hold Delete current name. Enter the new name and press r. Note A device name can have a maximum of 40 characters. Editing Device Access Settings Press M > Bluetooth > Device History Scroll to the device you want to set access for.
Page 157: Sending Contacts
Sending Contacts Press M > Contacts Highlight the contact you want to send. Press M > Send Via... > Bluetooth Select the device you want to transfer to. – or – Search for the device you want to transfer to by selecting [Find Devices] If prompted, bond with the device.
Page 158: Receiving Items
Receiving Items You receive a prompt when your phone has an incoming transfer. - (left softkey) to accept the transfer. Press Accept – or – - (right softkey) to reject the transfer. Press Reject Canceling Transfers You can cancel a transfer while the transfer is in progress.
Page 159: Section 3: Service Features
Section 3 Service Features...
Page 160: Service Features: The Basics
Section 3A Service Features: The Basics Message Center (page 148) Receiving Messages (page 149) Voicemail (page 150) Multimedia Messages (page 158) Text Messaging (SMS) (page 182) Caller ID Blocking (page 183) Responding to Call Waiting (page 183) Putting a Call on Hold and Making a Second Call (page 184) Making a Three-Way Call (page 185) Call Forwarding (page 185)
Page 161: Receiving Messages
Accessing the Message Center Press M > Messages. Message Center Options After accessing the message center, select the option you want: — begin creating an MMS message. [Create Mesg] — access voicemail messages you have Voice Mail received. — access MMS messages you have received. Inbox —...
Page 162: Voicemail
If you are not on a phone call when you receive a message, your phone sounds a notification tone every 30 seconds until you access the message, you dismiss the notification, or the alert time-out expires. When you are on a phone call, you can receive message notifications for all types of messages except MMS messages.
Page 163: Setting Up Your Voicemail Box
Setting Up Your Voicemail Box Using your i365 phone, dial your ten-digit Nextel Personal Telephone Number (PTN). For example: 7035557777. Follow the system instructions to create a new four- to seven-digit password, record your name, and record a greeting. When the system says, “Thank you for using Nextel Voicemail,”...
Page 164: Recording Your Active Greeting
Note It is important that you choose a number that is easy for you to remember, but hard for someone else to guess. Passwords using all the same digits, for example 4,4,4,4 or a sequential series of digits, 1,2,3,4, will not be accepted. Press ## to return to the main menu.
Page 165: Advanced Voicemail Features
Advanced Voicemail Features Multiple Greetings You can create up to five different greetings and designate which greeting will be your active greeting at any given time. The greeting that was recorded during your initial voicemail box setup is greeting 1. This is your default active greeting.
Page 166 Greetings Schedule You can choose to have your greetings automatically activated based on a pre-determined time schedule. By activating the Greeting Schedule, Greetings 1, 2, and 3 will automatically play according to the time schedule listed below. Greeting 1 Evenings and Weekends Greeting 2 Weekday...
Page 167 Changing the Playback Order of Messages You can select the order in which you want unheard messages to be played. You may listen to the last received message first, or you may listen to the first received message first. To select the order in which new messages should be played: From the main voicemail menu, press 4 to access personal options.
Page 168: Delivery Options
Delivery Options After you have created a message, you can assign the message to a category before you send it. Below is a list of the options that can be applied to a message: — Recipient will hear this message before Urgent other messages.
Page 169 Changing Your Voicemail Language to Spanish Nextel voicemail settings can be heard in English or Spanish. Use this feature to change the language you and your callers will hear while in voicemail. From the main voicemail menu, press 4 to access your personal options Press 4 again to access the language menu.
Page 170: Multimedia Messages
To enable or disable message forwarding, press 3. To change the forwarding type, press 2. Press ** to return to the main menu. Multimedia Messages Multimedia Messaging Service (MMS) lets you send and receive messages that may include text, pictures, and audio recordings.
Page 171: Creating And Sending Messages
To go to the previous page: Scroll left. – or – Press *. To open a message on the current page: Highlight the message you want to open and press r. – or – Press the number on the keypad corresponding to the number of the message.
Page 172 While entering text, you can always press M to choose a text input mode from the context-sensitive menu. For information on ways to enter text from the keypad, see “Entering Text” on page 20. Message Size You can create and send messages of up to 100 KB, including attachments.
Page 173 To address the message: Select . Enter the phone number or email address from the keypad and press r. Repeat this action to enter more phone numbers or email addresses. – or – Select recipients from Contacts or the Recent Calls list.
Page 174 If you want to create or edit the subject line: Select . Enter text from the keypad. Subject Select a . See “Quick Notes” on Quick Note page 166. When you are finished, press r. If you want to attach a picture, a ring tone, or a voice record, see “Attaching Pictures”...
Page 175 Replying to a Message You can reply to a received message while you are viewing it. If you have already viewed a message, you can also reply to it while it is highlighted in the message center. You cannot reply to unread messages.
Page 176 Note If the message you are replying to was sent with auto replies, it contains a numbered list of possible replies. Press the number of the reply you want to send. The reply is sent immediately without any further action. More Ways to Begin a Message In addition to beginning a message from the message center, you can begin a message from Contacts, the...
Page 177 To begin a message from My Pictures: From , scroll to or select the picture you My Pictures want to include in your message. - (left softkey). Press Send Create and send the message. The picture you selected is automatically included as an attachment.
Page 178 Direct Connect calls are displayed only if the Direct Connect number is stored in Contacts and its Contacts entry also contains a phone number or email address. To address a message from the Recent Calls list: While you are creating a message, scroll to or select Press M and select Recent Calls...
Page 179: Inserting Pictures
Note For information on how objects inserted into the body of a message appear when a message is received, see “Embedded Objects and Attachments” on page 172. Inserting Pictures You can insert pictures from My Pictures. Pictures that you download to your phone or receive in a message may be forward locked, meaning they cannot be included in a message.
Page 180: Attaching Pictures
To insert a voice record: While you are filling in the Select . A list of voice records that can Add VoiceRec be included in a message appears. Select the voice record you want to insert. To hear a voice record before inserting it, highlight the voice record and press Play - (left softkey).
Page 181 Select the ring tone you want to attach. To hear a ring tone before attaching it, highlight the ring tone. - (left softkey). Press Done Attaching Voice Records You can attach voice records from your list of voice records, or you can create one to attach to the message you are creating.
Page 182: Sent Items
Saving a Message in Drafts While you are creating a message, press M. Select Save You can continue to create the message. The version you saved in Drafts will not change. Sending a Draft Press M > Messages > Drafts Scroll to the draft you want to send.
Page 183 Press M. Select Forward Edit and send your message. Resending Messages If a message was not sent from your phone, you can resend it. Press M > Messages > Sent Items Scroll to the message you want to resend. - (left softkey). Press Resend Note...
Page 184: Receiving A Message
Receiving a Message When you receive an MMS message, a message notification appears on the display. To view the message: - (left softkey). The Press r or press Read message is downloaded from the message server. If the message fills more than one screen, scroll to read it.
Page 185 Note Attachments that are of an unknown type cannot be opened, but they can be deleted. See “Deleting Attachments” on page 177. Viewing a Slide Show Your phone can receive MMS messages containing slide shows. A slide show may contain a series of pictures that display in sequence.
Page 186: Actions For Received Messages
Inbox Icons Unread message. Read message. Reply sent. Forwarded. Locked. High priority. Attachment. Locked, with an attachment. High priority and locked. High priority with an attachment. High priority and locked, with an attachment. Section 3A. Service Features: The Basics Actions for Received Messages Deleting To delete unread messages: Scroll to the message you want to delete.
Page 187 Forwarding To forward a message: View the message you want to forward. – or – If you have already viewed the message, scroll to it. Press M and select Forward Create and send your message. Embedded objects and attachments are included when you forward a message.
Page 188 To send a Call Alert to a Direct Connect number in a message: View the message. Highlight the Direct Connect number you want to alert. Press M and select Alert Press the Direct Connect button. To make a Talkgroup call to a Talkgroup ID in a message: View the message.
Page 189 Going to a Web Site If a message contains one or more Web site URLs, you can go to the Web site. View the message. Highlight the Web site URL you want to go to. Press M and select Go To Website Note The entire URL must appear in the message.
Page 190: Customizing Mms
Saving Slide Shows When viewing a slide show in a message you have received, you can save the parts of the slide show. If the slide show contains pictures, you can save each picture as it appears. If the slide show contains voice records, you can save each voice record at any time during the slide show.
Page 191 — controls whether your phone Downloads automatically downloads new messages when they arrive, or only after you respond to a prompt or read the message from the Inbox. Set this option to Automatic if you want your phone to download new messages automatically;...
Page 192 - (right softkey). Press Delete - (left softkey) to confirm. Press r or press To delete all Quick Notes or all reply phrases: From the Setup menu, select Press M and select Delete All - (left softkey) to confirm. Press r or press Setting the Clean-up Option The clean-up option controls how long messages remain in the Inbox and Sent Items before they are...
Page 193: Managing Memory
To automatically delete messages now, press r - (left softkey). or press – or – To delete messages later, press softkey). Choosing to Delete Messages Later If you choose to delete messages later, rather than at the time you set the clean-up option, the type of clean-up option you set determines when messages are deleted.
Page 194: Text Messaging (Sms)
Note Messages are stored in your phone using the same memory space used to store Java applications data, voice records, ring tones, pictures, and wallpaper images. Deleting some of these other items frees memory for messages. Deleting Multiple Messages You can delete read, unlocked messages from the Inbox, messages in Drafts, or successfully sent messages in Sent Items in groups or all at once.
Page 195: Caller Id Blocking
Accessing Text Messages When you receive a text message, an alert is displayed on your phone’s screen. Press (left softkey) to display the message and use your navigation key to scroll down and view the entire message. Caller ID Blocking Caller ID allows people to identify a caller before answering the phone by displaying the number of the incoming call.
Page 196: Putting A Call On Hold And Making A
To accept the second call and end the active call: Press o. Your phone rings with the second call. Answer the second call. To decline the second call: - (right softkey). If you subscribe to Press voicemail, the call is forwarded to your voicemail box, unless you set Call Forward different number.
Page 197: Making A Three-Way Call
To make the call on hold active and put the active call on hold: - (right softkey). Press Switch Making a Three-Way Call With Three-Way Calling, you can talk to two people at the same time. When using this feature, the normal airtime rates will be charged for each of the two calls.
Page 198 Forwarding All Calls When you set your phone to forward all calls, an icon appears in the top row of the display: Phone line 1 is active; calls to phone line 1 are being forwarded. Phone line 1 is active; calls to phone line 2 are being forwarded.
Page 199 Turning Off Call Forwarding If you do not want all your calls forwarded, turn the feature off: Press M > Call Forward > To Set this option to All your calls are now sent to your phone. Calls you miss are forwarded according to the options set for missed calls.
Page 200: Making International Calls
Press r. Repeat step 2 through step 5 for If Unreachable When you are finished, press softkey). Viewing Call Forwarding Settings Press M > Call Forward > Forward > All Calls With highlighted, press Making International Calls Your service default is “International Calls Restricted.” Contact Nextel Customer Service to obtain international dialing access.
Page 201: Nextel Phone Services
Note Using 711 to reach Telecommunications Relay Service may not be available in all areas. To enable TTY mode: Press M > Settings > Phone Calls > TTY. Press and r select to enable TTY mode. For TTY options, highlight Type then select an option: (TeleTypewriter) –...
Page 202: Second Line Service
Second Line Service You can have two different phone numbers on the same phone. With Second Line Service, you can: Get separate bills for each phone line. Bring in an existing wireless or home phone number to Nextel to activate on the second line. Have two different area codes (must be in same market) to convey a local image to callers.
Page 203: Data Services
Section 3B Data Services Wireless Data Services (page 191) Downloading Content (page 194) Using Your Phone as a Modem (page 194) Data services offers easy and amazing features you will really use. These features – including messaging and portable Web access – let you have fun, stay in touch, and stay informed no matter where you go on the Nextel National Network.
Page 204 – Allows you to send email and chat. Email & IM – Allows you to access and manage Your Bookmarks your bookmarks. – Launches a Web search. Search – Provides access to other URLs. Go to URL – Lets you configure and manage your My Account browser settings.
Page 205 Deleting a Bookmark From the home page, select Your Bookmarks Highlight a bookmark and press softkey) > Delete : (left softkey) or press r to confirm Press the deletion. To return to the home page from any other Web page, press o. Going to a Specific Web Site To go to a particular Web site by entering a URL (Web site address):...
Page 206: Downloading Content
Downloading Content Your phone arrives with Java applications and games loaded and ready to install. You can download and install more Java applications. For more information on Java Security, see “Setting Privacy for Each Java Application” on page 92. Check the Downloads menu option on your phone for a catalog of items available for purchase and download.
Page 207 To connect your phone for use as a modem: Pull and rotate the connector cover. Insert a data cable into the phone’s charger connector. Note To use these services, you must subscribe to a Nextel Wireless Web access plan. For more information on setting up your computer and your i365 phone for packet and circuit data calls, go to www.nextel.com .
Page 208 Under Manufacturer, select For Model, choose Standard 19200 bps Modem click Next to continue. Select the COM port you want your phone installed on, and click and then Next installation. Creating a Dial-up Connection In order to connect to the Internet or a Network using your phone, you must set up a dial-up connection.
Page 209 Enter the user name and password for your Internet service and check the appropriate fields for connecting to your service provider (if applicable). Click Next and then the process. Connecting to the Internet or a Network for the First Time Before you use your phone to connect to the Internet or a network for the first time, you must disable LCP Extensions.
Page 210 – This command will show you the ATI4 manufacturer of the unit. – This ATD plus the dial-in number of the ISP command will show you if the unit can make a Circuit Data call. – This command will show you if the unit ATDS = 2 can make a Packet Data call.
Page 211: Section 4: Safety And Warranty
Section 4 Safety and Warranty Information...
Page 212: Important Safety Information
Section 4A Important Safety Information General Precautions (page 200) Maintaining Safe Use of and Access to Your Phone (page 201) Using Your Phone With a Hearing Aid Device (page 203) Caring for the Environment by Recycling (page 205) Caring for the Battery (page 205) Export Law Assurances (page 207) Radio Frequency (RF) Energy (page 208) Owner’s Record (page 210)
Page 213: Maintaining Safe Use Of And Access To
Laws vary as to specific restrictions. Remember that safety always comes first. Responsible driving practices can be found in “Smart Practices While Driving” on page 212 and/or at the Motorola Web site: www.motorola.com/callsmart. Purchase an optional hands-free accessory at your local Sprint Store, or call Nextel at 1-866-866-7509.
Page 214 Motorola approved clip, holder, holster, case or body harness. If you do not use a body-worn accessory supplied or approved by Motorola and are not using the radio product in the intended use positions along side the head in the phone mode or in...
Page 215: Using Your Phone With A Hearing
Phones that have been rated have a label with the rating(s) located on the box, and are listed at www.motorola.com/accessibility. These ratings are not guarantees. Results will vary depending on the user’s hearing device and individual type and degree of hearing loss.
Page 216 30-day Risk-Free Guarantee, you may return the phone within 30 days of purchase for a full refund. More information about hearing aid compatibility may be found at: www.motorola.com/accessibility, www.fcc.gov, www.fda.gov, and www.accesswireless.org. Getting the Best Hearing Device Experience With Your Phone To further minimize interference: Set the phone’s display and keypad backlight settings to...
Page 217: Caring For The Environment By Recycling
Caring for the Environment by Recycling This symbol on a Motorola product means the product should not be disposed of with household waste. Disposal of your Mobile Device and Accessories Please do not dispose of mobile devices or electrical accessories (such as chargers, headsets, or batteries) with your household waste.
Page 218 It’s best to replace the battery when it no longer provides acceptable performance. It can be recharged hundreds of times before it needs replacing. Don’t store the battery in high temperature areas for long periods of time. It’s best to follow these storage rules: Less than one month: -4°...
Page 219: Export Law Assurances
Choking Hazards Your portable radio or its accessories may include detachable parts, which may present a choking hazard to small children. Keep your device and its accessories away from small children. Glass Parts Some parts of your phone may be made of glass. This glass could break if the product is dropped on a hard surface or receives a substantial impact.
Page 220: Radio Frequency (Rf) Energy
Body-Worn Operation To maintain compliance with FCC RF exposure guidelines, if you wear a handset on your body, use the Motorola supplied or approved carrying case, holster or other body-worn accessory. If you do not use a body-worn accessory, ensure the antenna is at least 2.5 centimeters from your body when transmitting.
Page 221 Ministry of Health (Canada). Safety Code 6. Limits of Human Exposure to Radio frequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz, 1999. Australian Communications Authority Radio communications (Electromagnetic Radiation - Human Exposure) Standard 2003. ANATEL, Brazil Regulatory Authority, Resolution 303 (July 2, 2002) "Regulation of the limitation of exposure to electrical, magnetic, and electromagnetic fields in the radio frequency range between 9 kHz and 300 GHz."...
Page 222: Owner's Record
Online Product Registration: http://www.motorola.com/us/productregistration Product registration is an important step toward enjoying your new Motorola product. Registration permits us to contact you for product or software updates and allows you to subscribe to updates on new products or special promotions. Registration is not required for warranty coverage.
Page 223: Patent And Trademark Information
Patent and Trademark Information MOTOROLA, the Stylized M Logo and all other trademarks indicated as such herein are trademarks of Motorola, Inc. ® Reg. U.S. Pat. & Tm. Off. © 2008 Motorola, Inc. All rights reserved. Microsoft and Microsoft Internet Explorer are registered trademarks of Microsoft Corporation.
Page 224: Privacy And Data Security
If you choose to use your mobile device while driving, remember the following tips: Get to know your Motorola phone and its features such as speed dial and redial. If available, these features help you to place your call without taking your attention off the road.
Page 225 receive an incoming call at an inconvenient time, if possible, let your voice mail answer it for you. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow, ice, and even heavy traffic can be hazardous.
Page 226: Manufacturer's Warranty
Section 4B. Manufacturer’s Warranty Motorola Limited Warranty for the United States and Canada What does this Warranty Cover? Subject to the exclusions contained below, Motorola, Inc. warrants its telephones, pagers, messaging devices, and consumer and professional two-way radios (excluding commercial, government or industrial...
Page 227: Products And Accessories
Products and Accessories Products Covered Length of Coverage Products and One (1) year from the date of Accessories as purchase by the first defined above, consumer purchaser of the unless otherwise product unless otherwise provided for below. provided for below. Decorative Limited lifetime warranty for the Accessories and...
Page 228 (d) other acts which are not the fault of Motorola, are excluded from coverage. Use of Non-Motorola Products and Accessories. Defects or damage that result from the use of Non-Motorola branded or certified Products, Accessories, Software or other peripheral equipment are excluded from coverage.
Page 229: Who Is Covered
This warranty extends only to the first consumer purchaser, and is not transferable. What Will Motorola Do? Motorola, at its option, will at no charge repair, replace or refund the purchase price of any Products, Accessories or Software that does not conform to this warranty.
Page 230: What Other Limitations Are There
Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted Motorola software such as the exclusive rights to reproduce and distribute copies of the Motorola software. Motorola software may only be copied into, used in, and redistributed with, the Products associated with such Motorola software.
Page 231: Service And Repairs
If you have questions or need assistance, we’re here to help. Go to where you can select www.motorola.com/support, from a number of customer care options. You can also contact the Motorola Customer Support Center at 1-800-453-0920 (United States), 1-877-483-2840 (TTY/TDD United States for hearing impaired). Section 4B. Manufacturer’s Warranty...
Page 232: Index
Index Accessories 24 Charger 24 Li-Ion Battery 24 Activation 3 Answering Calls 29 Applications See Java Applications Attachments 172 See also MMS Messages, Attachments Audio Files See Voice Records Backlight 60, 70 Battery 10–13 Capacity 10 Charging 12 Disposal 206 Index Installing 10 Baud rate 64...
Page 233 Call Forwarding 185 All Calls 186 Missed Calls 187 Off 187 Call Timers 135 Call Waiting 183 Off 184 Caller ID 183 Calling Nextel Direct Connect Calls Nextel Direct Talk Calls 53 Talkgroup Calls 51, 53 Types of Calls 28 Using the Member ID 37 Calls Answering Automatically 61...
Page 234 Using Your Phone’s Datebook 108 DC/GC Options 62 See also Direct Connect Calls, Group Connect Calls, and Call Alerts Dialing Codes Non-Emergency Numbers Telecommunications Relay Service 188 Digital Rights Management, see DRM Direct Connect One Touch, Setting 74 Direct Connect Number and Groups 41 Viewing 19 Direct Connect Numbers 36...
Page 235 GPS Enabled 122 Almanac Data 126 Best Results 125 Emergency Calls 123 Map Software 127 Privacy Options 89 Security 90 Viewing Location 124 GPS PIN 64, 90 Group Connect Adding Group Members 40 Answering Calls 40 Creating Groups 40 Making Calls 39 Settings 62 Starting with Direct Connect Numbers 41...
Page 236 Storing to Contacts 130 Viewing 129 Memory Java Applications 118, 119, 121, 133 MMS Messages 149, 181 Pictures 134 Ring Tones 69 Voice Records 133 Menu ii Navigation 17 Selecting 18 Menu Style 71 Message Center 148 MMS Messages 158, 173 Text Messaging (SMS) 182 Voicemail 150 Messages...
Page 237 Owner’s Record 210 Packet Data 194 Passwords 64 Voicemail 151 Pauses 33 Storing 102 Phone Active Line 61 Locking 63 Your Numbers 19 Phone (illus.) 6 Phone as Modem 194–198 Phone Number Finding 33 Saving 33 With Pauses 33 Phone Settings 60–84 Call Answer Mode 84 Display Settings 70–72 Language 84...
Page 238 Ring Tones Attaching to Messages 168 Deleting 69 Deleting from Messages 177 Downloading 68 Inserting in Messages 167 Memory 69 Setting in Contacts 101 Vibrate 68 Viewing Assigned 68 Ringer Types 65 Safety Radio Frequency 208 Safety Information 200–213 Safety Tips 201 Security 63, 85–87 Sent Items 158, 170 Icons 171...
Page 239 Voice Name 35, 38 Creating 102 Voice Records Attaching 169 Creating 131 Deleting 132 Deleting from Messages 177 Inserting in Messages 167 Labelling 132 Locking 132 Memory 133 Playing 131 Saving from Messages 177 Voicemail Changing Password 151 Greetings 152 Group Lists 157 Message Forwarding 157 Playing Messages 151...

Motorola iDEN i365 User Manual

Quick Links

User Guide

Related Manuals for Motorola iDEN i365

Summary of Contents for Motorola iDEN i365