Motorola iDEN i365 User Manual page 113

To cancel a Contacts entry at any time press
(right softkey) and then press
return to the Contacts list or press o to return to
standby mode.
To create a Contacts entry:
Press M
1.
> Contacts > [New Contact]
– or –
Press M
> Contacts >
2.
If you want to assign a name to the entry:
Select . Enter the name. When you are
Name
finished, press r.
Press Browse - (left softkey) to select a name
Tip
already in Contacts.
3. If you want to assign a ring tone to the name:
Select
Ring Tone/Picture
Select the ring tone you want to assign.
4.
To assign a Contacts type to the number or
address being stored:
Select the Contacts type field.
Cancel
- (left softkey) to
Yes
.
M
> New Contact .
and then select .
Ringer
-
Select the Contacts type you want to assign.
( , ,
Mobile DC Work1
,
Talkgroup Group
5. To store a number or address:
Select the # field (or ID for an email address, or IP
for an IP address).
Enter the number or address. For phone
numbers, use the ten-digit format. For Direct
Connect numbers, be sure to include the
asterisks (*).
For email addresses, see "Entering Text" on
page 20.
Press Browse - (left softkey) to select a number or
Tip
address from Contacts, the Recent Calls list, or
Memo.
When you are finished, press r.
, , , ,
Work2 Home Email Fax
, , or .)
IP Other
Section 2E. Contacts
, ,
Pager
101