Hands-Free Visor Microphone Installation - Motorola iDEN i50sx Owner's Manual

Hands-Free Visor Microphone Installation

The hands-free visor microphone is designed to clip onto the vehicle's
sun visor.
NOTE:
1. Referring to Figure 6, clip the microphone to the vehicle's visor.
2. To avoid visual or physical obstruction, route the microphone cable
down inside the door molding. Allow sufficient slack at the connec-
tor end of the cable to reach the receptacle of the junction box. Place
the microphone and cable at least 1 foot (30cm) away from any part
of the portable phone's antenna.
3 Plug the cable into the junction box (see figure 2, Junction Box
Installation).
4 For optimal visor microphone performance, refer to figure 7 below.
Figure 7. Optimal visor microphone performance
The microphone should never be mounted near a
window or in a spot where road and ambient back-
ground noise will be substantially high (above 85dB
SPL).
Figure 6. Installing the Microphone
CAR KIT OWNER'S MANUAL 11