Using The Car Kit - Motorola iDEN i50sx Owner's Manual

USING THE CAR KIT

Your car kit is now installed for use.
NOTE:
PLACING THE PHONE INTO THE PHONE CRADLE
1. Insert the portable phone (lower end first) with battery attached,
into the cradle of the Car Kit, aligning the slots on the lower sides of
the portable with the alignment guides located at the bottom of the
Car Kit cradle.
2. Push the portable phone downward toward the bottom of the cradle,
then push the phone into the cradle, until it "snaps" in place.
The display of the portable phone will remain lit whenever the phone is
placed in the Car Kit.
MAKING A DISPATCH CALL - IN PRIVATE AND GROUP
READY MODE
1. Press and hold the PTT button on the remote-mount push-to-talk, or
phone PTT.
2. Speak into the visor microphone to transmit audio.
3. Incoming audio will be heard from the external speaker once the
PTT is released.
MAKING A HANDS-FREE TELEPHONE CALL
1. Use the keypad of the portable phone to place the call.
2. Speak into the visor microphone to transmit audio.
3. Incoming audio will be heard from the external speaker.
ADJUSTING THE VOLUME
Placing the portable phone into the cradle disables the phone's micro-
phone and speaker and routes the audio to the external microphone and
speaker.
Phones with older operating software may not fully
support all the car kit functions described below. For
best performance, use software version R 32.02.00
or later. Contact your Service Provider or Motorola
iDEN Customer Care to determine your software
level and upgrade option.
CAR KIT OWNER'S MANUAL 13