Table of Contents
Advertisement
Fabric Interconnect Power Input Requirements
To see the transceiver specifications and installation information, see
interfaces-modules/transceiver-modules/products-device-support-tables-list.html.
Fabric Interconnect Power Input Requirements
The following table lists the typical amount of power that the fabric interconnect consumes. It also lists the
maximum amount of power that you must provision for the fabric interconnect and power supply for peak
conditions.
Note
Power Specifications
Power specifications include the specifications for each type of power supply module.
1100-W AC Power Supply Specifications
These specifications apply to the fabric interconnect's AC power supply modules (UCS-PSU-6536-AC).
Characteristic
AC input voltage
AC input frequency
Maximum AC input current
Maximum input volt-amperes
Maximum output power per power supply
Maximum inrush current
Maximum hold-up time
Power supply output voltage
Power supply standby voltage
Efficiency rating
Form factor
Cisco UCS 6500 Series Fabric Interconnect Hardware Installation Guide
56
Some power supplies have capabilities that are greater than the maximum power requirements for a fabric
interconnect. To determine the power consumption characteristics for the fabric interconnect, use the typical
and maximum requirements that are listed in the following table.
https://www.cisco.com/c/en/us/support/
Specification
Nominal range: 100 and 240 VAC (Range: 90-132
VAC, 180-264 VAC)
Nominal range: 50 to 60 Hz (Range: 47-63 Hz)
13 A at 100 VAC
6 A at 240 VAC
1300 VA at 100 VAC
1100 W
33 A
12 ms at 1100 W
12 VDC
12 VDC
Climate Savers Platinum Efficiency (80Plus Platinum
certified)
RSP1
Specifications
Advertisement
Table of Contents
