Table of Contents
Advertisement
Requirements
Prior to installing this product, ensure that: Ethernet network wiring is in installed and functioning.
Mounting Options
Before installing the Cisco I/O Extender, mount the device using one of the following options.
•
•
•
Flat Surface
Place the device on a flat surface, and connect the devices.
Mount on a Wall (New Construction)
The device can mount to a 2-gang wall box.
•
•
•
Mount in a Rack
Front of Rack
Screw the rack mount ears to the front of the device.
Step 1
Screw the device to the front of the rack.
Step 2
Back of Rack
Screw the rack mount ears to the back of the device.
Step 1
Screw the device to the rails on the rack. If your rack has rear rails, this may be your best option.
Step 2
OL-27368-01
Place it on a flat surface
Mount it on the wall
Mount it on a rack—front facing or back facing
Mount the 2-gang wall box.
Hang the device on the two (2) screws in the wall box front side up.
Connect the devices at the bottom of the device.
Cisco Smart+Connected I/O Extender Reference Guide
Requirements
3
Advertisement
Table of Contents
