Preparing for Installation
This chapter contains the following topics:
•
•
•
•
•
•
•
•
•
•
•
Temperature Requirements
The fabric interconnect requires an operating temperature of 32 to 104 degrees Fahrenheit (0 to 40 degrees
Celsius). If the fabric interconnect is not operating, the temperature must be between –40 to 158 degrees
Fahrenheit (–40 to 70 degrees Celsius).
Humidity Requirements
Buildings in which the climate is controlled by air-conditioning in the warmer months and by heat during the
colder months usually maintain an acceptable level of humidity for the fabric interconnect equipment. However,
if the fabric interconnect is located in an unusually humid location, use a dehumidifier to maintain the humidity
within an acceptable range.
Altitude Requirements
Altitude rating is based on power supply installed; see critical components list in the system CB report for
altitude rating.
Temperature Requirements, on page 11
Humidity Requirements, on page 11
Altitude Requirements, on page 11
Dust and Particulate Requirements, on page 12
Minimizing Electromagnetic and Radio Frequency Interference, on page 12
Shock and Vibration Requirements, on page 13
Grounding Requirements, on page 13
Planning for Power Requirements, on page 13
Airflow Requirements, on page 14
Rack and Cabinet Requirements, on page 15
Clearance Requirements, on page 15
C H A P T E R
Cisco UCS 6500 Series Fabric Interconnect Hardware Installation Guide
2
11