Toro 139-6040 Installation Instructions Manual page 8

Figure 15
4. Mark the fuel-tank hose at the barb hose fitting
(Figure 15).
5. Cut the fuel-tank hose at the mark
6. Assemble the spring-type hose clamp that you
removed in step 1
the machine (Figure
(Figure
onto the fuel-tank hose on
16).
1. Fuel-tank hose
2. Hose clamp (spring-type)
g356302
7. Assemble the fuel-tank hose and hose clamp
onto the barb hose connector of the inboard
fuel-cooler hose
15).
8
Figure 16
3. Fuel-cooler hose (inboard
position)
(Figure 16).
g356301