Toro 139-6040 Installation Instructions Manual page 6

Assembling the Fuel Cooler to the
Radiator Bracket
1. Remove the 2 Flange capscrews (5/16 x 1/2
inch) that secure the radiator to the radiator
bracket (Figure 11).
Note:
Discard the 2 capscrews.
1. Capscrews (5/16 x 1/2 inch)
2. Assemble the 2 fuel hoses of the fuel cooler
through the grommet in the radiator bracket
(Figure 12).
Figure 11
g356309
1. Grommet
2. Fuel hoses (fuel cooler)
3. Radiator bracket
3. Align the hoes in the fuel-cooler bracket with the
holes in the radiator bracket
4. Secure the fuel-cooler bracket to the radiator
bracket (Figure
x 5/8 inch).
6
Figure 12
4. Capscrew (5/16 x 5/8 inch)
5. Fuel-cooler bracket
(Figure 12).
12) with the 2 capscrews (5/16
g356298