Co-recording
This function uses a recording device and saves data in the CPU module and video data captured by the network camera to a
file at a specified time or the timing at which a trigger such as an error occurrence is satisfied.
The master station or the RJ71GN11-T2 of the local station relays a co-recording trigger among the recording devices on the
base unit of the own station and the recording devices of other stations, and performs co-recording on the network.
The co-recording function records, reproduces, and analyzes data in the entire system. For details, refer to the following.
MELSEC iQ-R System Recorder Co-recording Function Reference Manual
Before using this function, check the firmware version of the RJ71GN11-T2. ( Page 320 Added and
Enhanced Functions)
1
1 FUNCTIONS
93
1.8 Others